45
NOTICE
1.
The spray arms may be equipped with a transport protection. Remove
the transport protection before installing the appliance.
2.
Only use a water softener (= dishwasher salt) which is suitable for dishwashers.
The water hardness depends on your place of residence. Hard water in a
dishwasher generates deposits of minerals and salts on your dishes and in the
appliance. The water softener removes minerals and salts from the water.
3.
Use a rinse aid which is suitable for a dishwasher only.
Never use other
chemical substances
, e.g. a dishwasher cleaner or liquid cleaners; otherwise
you will damage the appliance.
4.
Only use a detergent and additives which are suitable for dishwashers. Do not
use soap, washing agents, hand wash detergents etc.
5.
When you move the appliance, hold it at its base and lift it carefully. Keep the
appliance in an upright position.
6.
Never use the door for moving the appliance as you will damage the hinges.
7.
The appliance must be transported and installed by at least two persons.
8.
When you unpack the appliance, you should take note of the position of every
part of the interior accessories in case you have to repack and transport it at a
later point of time.
9.
The connection to the water supply should be carried out by a qualified
professional.
10.
Do not operate the appliance unless all components are installed properly.
11.
Do not stand or lean on the racks or the door.
12.
Plastic-made items must not touch the heating elements.
13.
Only wash dishwasher-proof plastic-made items in the appliance. Such items are
labelled by their manufacturer.
14.
After each rinse cycle check that the water-softener container is empty.
15.
Never use cleaning sprays to clean the door as they can damage the lock and
electric components.
2. Installation
Unpacking and Positioning
1.
Unpack the appliance carefully. Completely remove the transport-protection. Be
very careful and do not use any aggressive or abrasive detergents to remove
residuals of the transport-protection.
2.
The spray arms may be equipped with a transport protection. Remove
the transport protection before installing the appliance.
3.
Install the appliance in a dry and well-ventilated place.
