50
a: hexagon screwdriver /CR-V 4 mm
2.6 Installation of the water inlet hose(for cold water
Connect the inlet hose to a connector with a 3/4
inch thread firmly and securely. When the hoses are
new or were not used for an extended period of
time, let the water flow until the hose is clear of any
contamination.
NOTICE!
Otherwise the water inlet may be
blocked and the appliance will be damaged.
2.7 Water outlet hose installation
Fit the drainage hose of your
appliance to the drainage pipe
without bending.
If the length of the hose is not
sufficient, apply to your
authorized service for an extension
made from the same material as the
original hose. Remember that the
length of the hose (including
extension) should not exceed 4
meters.