34 - ATR142 -
User manual
The input value (included between minimum and max limit)
is linearly converted into the retransmitted value which is
included between min and max output value. Rescaling is not
executed if parameters
Lo.L.r.
and
up.L.r.
have the same value.
10.2.2
Master Mode Remote process
To enable this function it is necessary to select
r.pro.
on
parameter 59
mast
. In this mode the process value on ATR142
is a value read via serial communication. The ID of the slave
must be same as value selected on parameter 57
sL.ad.
and
the word to read is selected on parameter 60
add.r
. Two
successive pollings will be delayed for the time selected
on parameter 57
se.de.
The read value might be rescaled
according to the proportion described in the following table:
mast.
Limits of read value
Limits of rescaled value
Min
Max
Min
Max
r.pro.
Read
Process
Lo.L.r.
Lower
Limit
Re-
transmis-
sion
up.L.r.
Upper
Limit
Re-
transmis-
sion
Lo.L.i.
Lower
Limit Input
up.L.i.
Upper
Limit Input
11
Configuration
11.1 Modify Configuration Parameter
For configuration parameters (parameter 11.)
Press
Effect
Do
1
FNC
for 3s
Display 1 shows
0000
with the 1st
digit flashing, while
display 2 shows pass.
2 “n” and “m”
Change the flashing
digit and move to
the next one using
the
SET
key.
Enter password
1234
