Piusi K900, Бюллетень

Страница: 20 / 31

49
/124 49
/60
EN
This manual is the property of PIUSI S.p.A. Any reproduction, even partial, is forbidden.
Translated from Italian
OPERATION Display
Connfiguration
1
NONE
K900 in normal mode, not in counting mode
2
LONG CAL KEY KEYING
K900 enters calibration mode, shows “CAL” and displays the calibration factor being
used instead of the partial. The words “Fact” and “User” indicate which of the two fac-
tors (factory or user) is currently being us
3
LONG RESET KEY KEYING
K900 shows “CAL” and the partial at zero.
K900 is ready to perform in-field calibration by dispensing
4
LONG RESET KEY KEYING
We now go on to Direct change of the calibration factor: the word “Direct” appears
together with the Currently Used calibration factor. In the bottom left part of the dis-
play, an arrow appears (upwards or downwards) defining the direction (increase or
decrease) of change of the displayed value when subsequent operations 5 or 6 are
performed
5
SHORT RESET KEY KEYING
Changes the direction of the arrow. The operation can be repeated to alternate the
direction of the arrow.
6
BSHORT/LONG CAL KEY KEYING
The indicated value changes in the direction indicated by the arrow
- one unit for every short CAL key keying
- continually if the CAL key is kept pressed. The speed increase rises by keep-
ing the key pressed.
If the desired value is exceeded, repeat the operations from point (5).
7
LONG RESET KEY KEYING
K900 is informed that the calibration procedure is finished.
Before performing this operation, make sure the indicated value is that required
8
NO OPERATION
At the end of the calculation, the new USER K FACTOR is shown for a few seconds,
after which the restart cycle is repeated to finally achieve standby condition.
IMPORTANT: From now on, the indicated factor will become the calibration factor used
by the meter and will continue to remain such even after a battery change
9
NO OPERATION
K900 stores the new calibration factor and is ready
for dispensing, applying the newly defined USER K FACTOR.