Piusi K900, Бюллетень

Страница: 12 / 31

41
/124 41
/60
EN
This manual is the property of PIUSI S.p.A. Any reproduction, even partial, is forbidden.
Translated from Italian
G1 DISPENSING IN NORMAL MODE
FOREWORD
Normal mode is the standard dispensing. While the count is made, the partial and resettable
total are displayed at the same time (reset total).
WARNING
Should one of the keys be accidentally pressed during dispensing, this will have
no effect.
stand by
A few seconds after dispensing has ended, on the lower register, the display switches from
resettable total to general total: the word reset above the word total disappears, and the
reset total is replaced by the general total.
This situation is called standby and remains stable until the user operates the K400 again.
G1.1 PARTIAL RESET (NORMAL MODE)
The partial register can be reset by pressing the reset key when the meter is in
standby, meaning when the display screen shows the word “TOTAL”.
After pressing the reset key, during reset, the display screen first of all shows all the
lit-up digits and then all the digits that are not lit up.
At the end of the process, a display page is first of all shown with the reset partial
and the reset total
and, after a few moments, the reset total is replaced by the non resettableTotal.