Pitney Bowes K700 series, Руководство оператора

Страница: 28 / 89

3-3
mail station
™
Digital Postal Meter | SV61374 Rev. J
3 ● Running Mail
Lock
Class
Funds
Men
u
*#_
GHI
PQRS
Back
ABC
JKL
TUV
Space
DEF
MNO
WXYZ
Shift
.
Revie
w
no
yes
Enter
Using the Optional Scale with Optional Internal Rating
Use this method when you are using the optional scale and optional
internal rating feature.
1. Place mail piece on scale. The weight of the mail piece appears on
the display.
NOTE 1: If there was no class specified on the display when you
placed the mail piece, you may need to scroll and select the desired
class (if you are unsure if a particular class is best for your mail piece,
call your local post office or visit www.USPS.com ). Otherwise, the
mailstation™
meter selects a class based on the weight of the mail
piece.
NOTE 2: The mailstation™ meter allows you to enter either a ZIP
code or a Zone number for those USPS classes that require a
destination entry (e.g., Priority class over 1 lb.). When prompted
to enter a ZIP or Zone in these cases, you may either key in the
5-digit ZIP code or one-digit Zone number (0-8). In any case,
the ZIP/Zone entered should represent the ZIP/Zone of the mail
piece destination,
not the machine.
2. The display shows the final postage amount and class chosen.
3. Slide the envelope (or tape sheet if mail piece is too big for machine)
into the mail deck. The mailstation™ meter prints the digital indicia
and indicates when to remove the mail piece.
Weight Hold Mode
The weight hold mode, when activated (see Section 6 - Machine
Settings ), allows you to rate a piece of mail even if the weight is removed
from the scale. You would use this mode
when the size of the mail piece covers
the display screen. The mailstation™
meter holds the weight in memory until
you select a class and finish the rating
process. When using this mode:
• "WH" displays when the weight is in
memory.
• The weight remains for 10 seconds
after the piece is removed.
• To extend the time, press Enter/yes .
• To clear the weight before the 10
seconds finish, press Clear/Back .