Pitney Bowes ADDRESSRIGHT DA950, Руководство оператора

Страница: 28 / 120

2
Basics
Setting up a print job means adjusting the printer to ac-
com mo date the width, height, thickness and weight of your
ma te ri al.
There are two things that determine how reliably your
printer feeds: the setup adjustments and the quality of your
material. A good setup minimizes misfeeds and jams. And
your printer will perform at its best when you run material
that falls within our published specifications. See Appendix
B for complete material specifications.
1. Set the Separator Gap
Whenever you switch from one material type to another,
you need to set the gap between the separators and the
feed roller before printing begins.
There are three positions of the "H" Block:
• Lever fully down - adjusted to media thickness (ready to
operate).
• Lever midpoint - not adjusted to any media (free-floating
on media, not set up to operate).
• Lever fully up - locked in the up position, not adjusted to
any media thickness.
Setting Up A
Job
SV61183 Book.indb 3-2 SV61183 Book.indb 3-2 6/9/2004 9:16:47 AM 6/9/2004 9:16:47 AM