Section One: ASSEMBLY INSTRUCTIONS
ATTACHING ENCLOSURE KIT TO THE UNIT:
(models SC only)
Tools Required:
1– #2 Phillips Screwdriver
Installation Steps
To ease installation, assemble the majority of the enclosure kit to
the leg assembly, on a raised work bench or flat surface.
Step 1 Attach Door Stops: - Single Door Model
You will require the Bottom Door Stop # 24 and the Magnetic Door Stop
#25, as well as 4 x 5/32 screws.
Install the Bottom Door Stop #24 using 2 x 5/32 screws and
your Phillips Screwdriver. Ensure that the flat bottom of the
Door Stop is facing toward the front of the cart, while the
raised stop is facing toward the back of the cart.
Line up the pre-drilled screw holes on the bottom cart plate,
with the holes on the bottom of the stop. Hand start the
screws first, then use the correct tool to attach firmly to the
cart shelf.
Install the Top Door Magnet #25 to the side of Leg #10,
(with the Bottle Opener) using 2 x 5/32 screws. Ensure the
raised magnet is facing toward the front of the cart, while
the flat surface with the screw holes, is facing toward the
rear of the cart.
Page 9
Hardware Required:
1
x # 19 Rear Panel
2 x # 20 Side Panel
1 or 2 x # 21 Door Panel or Panels
2 or 4 x # 22 Handle Bezels
1 or 2 x # 23 7 1/4” Handle or Handles
1
x #24 Bottom Door Stop
1
x #25 Top Door Magnet
1 - Hardware Package #
(for Enclosure Kit)
16 x 5/32 Screws
# 25 Magnetic Door Stop
# 24 Bottom Door Stop
Step 1 B Attach Bottom Door Stop: - Double Door Model
You will require the Bottom Door Stop # 24 and 2 x 5/32 screws.
Install the Bottom Door Stop #24 using 2 x 5/32 screws and
your Phillips Screwdriver. Ensure that the flat bottom of the
Door Stop is facing toward the front of the cart, while the
raised stop is facing toward the back of the cart.
Line up the pre-drilled screw holes on the bottom cart plate,
with the holes on the bottom of the stop. Hand start the
screws first, then use the correct tool to attach firmly to the
cart shelf.
