PISCO FUS20, Руководство пользователя, Страница: 6 / 36

2011 NEW PRODUCTS
Please be sure to read before handling the product. Please refer to "safety instructions", "common safety instructions for products listed in this manual", "common safety instructions for flow controller" from page 24 through 35.
6
S pecification
Item Full-scale flow 005 010 020 050 100 200 500 101 201
Flow rate
range
(*1)
005 500ml/min ●
010 1l/min ●
020 2l/min ●
050 5l/min ●
100 10l/min ●
200 20l/min ●
500 50l/min ●
101 100l/min ●
201 200l/min ●
Port size
4 ø4mm Quick-fitting ● ● ● ● ● ●
6 ø6mm Quick-fitting ● ● ● ● ● ● ●
8 ø8mm Quick-fitting ● ● ●
10 ø10mm Quick-fitting ● ●
Built-in needle valve N (*9) ● ● ● ● ● ● ● ● ●
Flow rate display
(*1) (*2)
Display method 4 4 digits, 2 color LCD
Display
range
F
0~500
m
l
/min
0~1000
m
l
/min
0~2.00
l
/min
0~5.00
l
/min
0~10.00
l
/min
0~20.0
l
/min
0~50.0
l
/min
0~100.0
l
/min
0~200
l
/min
R -500~500
m
l
/min
-1000~1000
m
l
/min
-2.00~2.00
l
/min
-5.00~5.00
l
/min
-10.00~10.00
l
/min
-20.0~20.0
l
/min
-50.0~50.0
l
/min
-100.0~100.0
l
/min
-200~200
l
/min
Minimum unit setting 1m
l
/min 0.01
l
/min 0.1
l
/min 1
l
/min
Accumulation
(*3)
Max flow rate 9999999m
l
99999.99
l
999999.9
l
9999999
l
Mini. unit setting 1m
l
0.01
l
0.1
l
1
l
Accumulated pulse output rate 5m
l
10m
l
0.02
l
0.05
l
0.1
l
0.2
l
0.5
l
1
l
2
l
Working
condition
Fluid medium (*4) Clean air (JIS B8392-1.1.1 to 5.6.2), Compressed air (JIS B8392-1.1.1 to 1.6.2),
and nitrogen gas
Max working pressure 0.7MPa
Min working pressure -0.09MPa
Withstand pressure 1MPa
Ambient Temp. & humidity 0 to 50ºC, max. 90%RH
Working fluid temp. 0 to 50ºC (no dew condensation)
Accuracy
Assured accuracy range 3 ~ 100%F.S.
Linearity (display/analog output) Max ± 3%F.S. (Air vent for 2ndary side 、 25ºC)
Pressure characteristics Max ± 5%F.S. (-0.09 to 0.7MPa, where air vent for 2ndary side is reference)
Temp. characteristics Max ± 0.2%F.S./ºC (15 to 35ºC, where 25ºC is reference)
Repeatability Max. ± 1%F.S.
Response time (*5) Max.50ms
Output
Switch output
N 2 points output (NPN open collector output: max. 50mA, voltage drop: max. 2.4V)
P 2 points output (PNP open collector output: max. 50mA, voltage drop: max. 2.4V)
Analog output
V 1 voltage output 1 to 5V (connected load impedance: min. 50kΩ)
A Current output 4 to 20mA (connected impedance: 0 to 300Ω)
Power supply voltage (*6)
V DC12 ~ 24V (10.8 ~ 26.4V)
A DC24V (21.6 ~ 26.4V)
Current consumption (*7) Max.50mA
Lead wire ø3.7 AWG26 equiv. x 5 core cable (connector joint), Insulator O.D. ø1.0mm
Functions Flow rate display, flow rate - peak hold, switch output, analog output, and other
Installation Installing orientation
Horizontal or vertical
Straight pipe introduction Not required
Protective structure IEC standard: IP40
Protective circuit (*8) Power supply and switch output reverse connection protections, and switch output
load short-circuit protection
EMC directive Conformity