DP-SW20 User Manual
Appendix
© 2008 Pirelli Broadband Solutions S.p.A. All Rights Reserved.
85
A.1.5
S
AFETY
P
RECAUTIONS FOR
P
OWER
S
UPPLY
U
NIT
●
Use the correct external power source
A product should be operated only from the type of power source indicated on the
electrical ratings label. If you are not sure of the type of power source required, consult
your authorized service provider or local power company. For a product that operates
from battery power or other sources, refer to the operating instructions that are included
with the product.
●
Handle battery packs carefully
This product contains a Li-Ion Polymer battery. There is a risk of fire and burns if the
battery pack is handled improperly. Do not attempt to open or service the battery pack.
Do not disassemble, crush, puncture, short external contacts or circuits, dispose of in fire
or water, or expose a battery pack to temperatures higher than 45˚C (113˚F).
Warning:
DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED TO REDUCE RISK
OF FIRE OR BURNS, DO NOT DISASSEMBLE, CRUSH, PUNCTURE, SHORT EXTERNAL
CONTACTS, EXPOSE TO TEMPERATURE ABOVE 45˚C (113˚F), OR DISPOSE OF IN
FIRE OR WATER. REPLACE ONLY WITH SPECIFIED BATTERIES. RECYCLE OR DISPOSE
OF USED BATTERIES ACCORDING TO THE LOCAL REGULATIONS OR REFERENCE
GUIDE SUPPLIED WITH YOUR PRODUCT.
A.2
PC
R
EQUIREMENT TO
R
UN
A
CTIVE
S
YNC
P
ROGRAM
To connect your device to the PC, you have to install Microsoft® ActiveSync® program on
your PC. The programs of ActiveSync 4.5 and Windows Mobile Device Center 6.1 are included
in the Installation CD.
Note:
Windows Mobile Device Center 6.1 is only supported on Windows Vista.
1.
ActiveSync4.5 is compatible with the following operating systems and applications:
●
Microsoft® Windows® 2000 Service Pack 4
●
Microsoft® Windows® Server 2003 Service Pack 1
●
Microsoft® Windows® Server 2003 IA64 Edition Service Pack 1