DP-SW20 User Manual
Setting Your Phone
40
© 2008 Pirelli Broadband Solutions S.p.A. All Rights Reserved.
5.6
W
I
F
I
S
ETTINGS
5.6.1
T
O
E
NTER
W
I
F
I
C
ONNECTION
Click
Start > Settings > Wi-Fi > Connections
, following the direction on the screen, you
can either click
New
to create a new access point to connect to, or click
Menu > Scan AP
to
let it scan available access points.
●
Click
New
, you need to change
Name/AP Setting/IP Setting
.
Name
:
Name for wireless network
AP Setting
:
Setup AP-related parameters
，
i.e. ESSID, Security, and Password. Now
the phone support 4 security method: WEP; WPA;; WPA-PSK;802.1X.
IP Setting
:
Set TCP/IP for Wireless LAN, User can choose to auto-retrieve IP Address,
or use a static IP Address.
●
Click
Menu>Scan AP
It starts to auto-scan available AP. Soon you will see a list of AP names presenting there,
with its signal strength behind. Select one you desire and then the connection setup is
complete with ESSID as its name, and IP auto-retrieved.
The phone support up to 16 profiles, you can set one as default, it can automatic use the
default profile to connect WLAN. If the default profile is not ready, the phone will select
the best signal profile.
5.6.2
T
O
E
NTER
SIP
P
HONE
Before you can use SIP phone feature, you need to do the following:
Click
Start > Settings > WiFi > SIP phone
, click
New
to set up a SIP phone:
1.
In Name, specify a name for your SIP Phone.
2.
In SIP phone account
，
Fill in the information required for SIP phone account, such as
User name, Password, Registrar Server, Port, Proxy Server, and so on. All of them are
accompanying with your device and your VoIP service provider.
3.
Codec setting
，
user can change the codec setting and Network bandwidth to obtain the
best voice performance of the SIP phone. We suggest users to use the default settings
.
4.
Advanced Setting - Particular settings for advanced user and SIP phone service operator
only.
5.
STUN Setting, Some SIP service providers need to setup the following settings. Enable
the setting it can solve some NAT transport problem. Comply with the information offered
by the service provider as standard.
6.
Fill in information mentioned above and click
Done
.
