4
4
16
iPod/iPhone/iPad playback
When using iPad
Make sure to place the iPad in a horizontal direction on the
stand.
Playing your iPod/iPhone/iPad
CAUTION
•
When your iPod/iPhone/iPad is connected to this receiver
and you wish to operate the iPod/iPhone/iPad directly, be
sure to hold the iPod/iPhone/iPad steady with the other
hand to prevent malfunctions due to faulty contacts.
1
Connect your iPod/iPhone/iPad.
To connect your iPod/iPhone/iPad, see
Connect iPod/
iPhone/iPad to the USB terminal
on page 15.
2
Press iPod/USB to select iPod/USB as the input source.
iPod/USB
is shown on the display and starts playback.
Note
•
When the iPod/iPhone/iPad is connected to this receiver,
the playback information for the songs are displayed on the
iPod/iPhone/iPad display. Pressing
iPod CONTROL
button
on the remote will switch the display and display the
information on the front panel of the receiver.
Important
•
If this receiver cannot play your iPod/iPhone/iPad, perform
the following troubleshooting checks:
-
Check whether the iPod/iPhone/iPad is supported by this
receiver (page 15).
-
Reconnect the iPod/iPhone/iPad to the receiver. If this
doesn’t seem to work, try resetting your iPod/iPhone/
iPad.
-
Check the iPod/iPhone/iPad software is supported by this
receiver.
•
If the iPod/iPhone/iPad cannot be operated, check the
following items:
-
Is the iPod/iPhone/iPad connected correctly? Reconnect
the iPod/iPhone/iPad to the receiver.
-
Is the iPod/iPhone/iPad experiencing a hangup? Try
resetting the iPod/iPhone/iPad, and reconnect it to the
receiver.
-
When connecting the iPad, use only an iPad dedicated
cable.
Tip
•
iPod/iPhone/iPad recharging occurs whenever an iPod/
iPhone/iPad is connected to this receiver. (This function is
only supported when the power is initially turned on or
during Network Standby).
•
When input is switched from iPod/USB to another
function, iPod/iPhone/iPad playback is temporarily
stopped.