The System Setup menu
09
34
En
AV Direct setting
The AV Direct mode allows the receiver to pass audio/
video signals arriving at one of the AV connector inputs
to the other AV connector outputs without the sound
being routed to the speakers. (See also
The AV Direct
mode
on page 9.) In AV Direct mode, the current input is
shown (at reduced brightness) in the front panel display.
The AV Direct setting determines whether the receiver
switches to AV Direct mode automatically, or only when
you switch it manually.
•
AVD MANU
– Allows you to switch between standby
and AV Direct mode using the
AV DIRECT
button on
the remote control.
•
AVD AUTO
– Automatically switches to AV Direct
mode when an incoming signal is sensed by the
receiver in standby.
Auto input select setting
Specifies how the receiver responds when it senses that
a component connected to one of the SCART AV
connectors is switched on.
•
SEL MANU
– You must select the receiver’s input
manually using the front panel
INPUT SELECTOR
, or
the input buttons on the remote control.
•
SEL AUTO
– When a component connected to one of
the SCART AV connectors (except the
DVR/TV
) is
switched on, the receiver automatically switches to
that input.
• When set to
AVD AUTO
, if a connected component
is switched on, you cannot switch this receiver into
standby (
INPUT ON
appears in the display).
• You can’t use the sleep timer when the AV Direct
setting is
AVD AUTO
(see also
Using the sleep timer
on page 30).
• AV Direct does not work when EON is on (see also
Enhanced Other Network (EON)
on page 29).
SR+ control for Pioneer plasma displays
Make the following settings if you have connected a
Pioneer plasma display to this receiver using an SR+
cable. Note that the number of function settings available
will depend on the plasma display you've connected.
See also
Using this receiver with a Pioneer plasma display
on page 16 and
Using the SR+ mode with a Pioneer
plasma display
on page 35.
Volume control setting
•
VOL C OFF
– The receiver does not control the
volume of the plasma display
•
VOL C ON
– When the receiver is switched to one of
the inputs that use the plasma display (
DVD
, or
another one of functions listed below), the volume on
the plasma display is muted so only sound from the
receiver is heard.
Function setting for DVD input
•
DVD:1
–
DVD:5
or
TV
– Matches the
DVD
function of
the receiver with a numbered video input on the
plasma display. For example,
DVD:3
matches the
DVD
input with video input 3 on the plasma display.
Function setting for STB
input
•
STB:1
–
STB:5
or
TV
– Matches the
STB
function of
the receiver with a numbered video input on the
plasma display. For example,
STB:1
matches the
STB
input with video input 1 on the plasma display.
Function setting for DVR/TV input
•
DVR:1
–
DVR:5
or
TV
– Matches the
DVR/TV
function of the receiver with a numbered video input
on the plasma display. For example,
DVR:2
matches
the
DVR/TV
input with video input 2 on the plasma
display.
Function setting for VIDEO input
•
VIDEO:1
–
VIDEO:5
or
TV
– Matches the
VIDEO
function of the receiver with a numbered video input
on the plasma display. For example,
VIDEO:TV
matches the
VIDEO
input with
TV
on the plasma
display.
Function setting for FRONT input
•
FRONT:1
–
FRONT:5
or
TV
– Matches the
FRONT
function of the receiver with a numbered video input
on the plasma display. For example,
FRONT:4
matches the
FRONT
input with video input 4 on the
plasma display.
vsx-c402_MY.book 34 ページ ２００４年２月６日 金曜日 午後７時１９分