background image

 

Before you start

 

3

 

En

English

 

Before you start

 

Checking the supplied accessories

 

Please check that you've received the following supplied 
accessories:

• AM loop antenna

• FM wire antenna

• Power cable

• Dry cell batteries (AA Size / IEC R6P) x2

• Remote control unit

• Operating instructions

• Speaker cable labels

• Warranty card

 

Loading the batteries

 

The remote control operates on two AA batteries 
(supplied).

• Incorrect use of batteries may result in such hazards 

as leakage and bursting. Observe the following 
precautions:

• Never use new and old batteries together.

• Insert the plus and minus sides of the batteries 

properly according to the marks in the battery case.

• Batteries of the same shape may have different 

voltages. Do not use different batteries together.

• When disposing of used batteries, please comply 

with governmental regulations or environmental 
public institution’s rules that apply in your country or 
area.

 

Ventilation

 

• When installing this unit, make sure to leave space 

around the unit for ventilation to improve heat 
dispersal (at least 20 cm at the top, 50 cm at the rear, 
and 10 cm at each side). If not enough space is 
provided between the unit and walls or other 
equipment, heat will build up inside, interfering with 
performance and/or causing malfunctions. See 
below for exceptions to this.

• Don’t place anything on top of the receiver except for 

a Pioneer DV-464, 360, 454, 350, 444, 474 or 545 DVD 
player. If you do place one of these pieces of 
equipment on top of the receiver be sure to leave the 
ventilation space over it as prescribed above.

• If using a rack to hold the receiver make sure the 

back of the rack and the left side are open. 

• Also, if you’re using a case with doors, leave the 

doors open when using the receiver.

• Do not place on a thick carpet, bed, sofa or fabric 

having a thick pile. Do not cover the receiver with 
fabric or other covering. Anything that blocks 
ventilation will cause the internal temperature to rise, 
which may lead to breakdown or fire hazard.

• The receiver may become hot while in use, please 

take care around it.

 

Maintenance of external surfaces

 

• Use a polishing cloth or dry cloth to wipe off dust and 

dirt.

• When the surfaces are dirty, wipe with a soft cloth 

dipped in some neutral cleanser diluted five or six 
times with water, and wrung out well, and then wipe 
again with a dry cloth. Do not use furniture wax or 
cleansers.

• Never use thinners, benzine, insecticide sprays or 

other chemicals on or near this unit, since these will 
corrode the surfaces.

1

2

3

vsx-c402_MY.book 3 ページ 2004年2月6日 金曜日 午後7時19分

Содержание VSX-C402















































Отзывы: