Using other functions
08
30
En
Chapter 8
Using other functions
Selecting the input signal type
The
DVD
,
STB
,
DVR/TV
and
FRONT
inputs all have both
analog and digital jacks. You can select the type of signal
to be used in each case. The input signal type for the
current input is indicated in the display:
ANA
(analog),
DIG
(digital).
The default
AUTO
setting is usually sufficient, letting the
receiver decide the most suitable signal type. However, if
you want to record from the
VIDEO IN/OUT
AV
connector or the
DVR/TV IN/OUT
AV connector, then
you should set the input signal type to analog.
1
Press RECEIVER.
2
Press SIGNAL SELECT to change the input signal
type.
•
SEL. AUTO
– (default setting) Uses digital if available,
otherwise analog
•
SEL. ANA
– Uses the analog signal
•
SEL. DIG
– Uses the digital signal
• When the
VIDEO
or
FM/AM
inputs are used, the
display always shows
ANA
(analog).
Using the sleep timer
The sleep timer automatically puts the receiver into
standby after the specified period of time.
1
Press RECEIVER.
2
Press SLEEP to set the sleep timer.
Press repeatedly to select between:
•
90 MIN.
– Switches to standby after 90 minutes
•
60 MIN.
– Switches to standby after one hour
• 30 MIN.
– Switches to standby after 30 minutes
The sleep timer indicator (
) lights when the sleep timer
has been set.
• The sleep timer is cancelled if you switch on the AV
Direct function. See also
The AV Direct mode
on
page 9 and
AV Direct setting
on page 34.
• Press the
SLEEP
button once to view how much time
is left on the timer before shutdown. Each press after
that will cycle through the possible sleep time
lengths.
RECEIVER
SIGNAL SEL BAND
RECEIVER
SLEEP
vsx-c402_MY.book 30 ページ ２００４年２月６日 金曜日 午後７時１９分