The System Setup menu
09
32
En
Chapter 9
The System Setup menu
Making receiver settings from the
System Setup menu
This receiver allows you to make detailed settings to
optimize the surround sound performance. You only
need to make these settings once (unless you change the
placement of your current speaker system or add new
speakers).
1
If the receiver isn’t already on, press
RECEIVER to switch it on.
2
Press SYSTEM SETUP to enter the setup menu.
3
Use the
and
buttons to select a setup
parameter to adjust.
As you scroll through the options, the current settings
are displayed. See below for a full list and description of
each.
4
Use the
and
buttons to change the current
setting.
5
After making all the settings, press ENTER to exit
the setup menu.
Setup menu options
Below are all the available settings in the setup menu.
The first setting in each section is the default. See also
the notes in each section for additional information
about the settings.
Front speakers setting
Specifies the size of the front speakers:
•
FRONT S
– Small (the cone diameter is less than
12 cm)
•
FRONT L
– Large (the cone diameter is 12 cm or
greater)
Center speaker setting
Specifies the size of the center speaker:
•
CENTER S
– Small (the cone diameter is less than
12 cm)
•
CENTER L
– Large (the cone diameter is 12 cm or
greater)
•
CENTER ––
– If you have not connected a center
speaker
Surround speaker setting
Specifies the size of the surround speakers:
•
SURR. S
– Small (the cone diameter is less than
12 cm)
•
SURR. L
– Large (the cone diameter is 12 cm or
greater)
•
SURR. ––
– If you have not connected surround
speakers
• If the front speakers are set to
FRONT S
you can’t
choose
SURR. L
for the surround speakers or
CENTER L
for the center speaker.
Subwoofer setting
This option only appears if you have connected a
subwoofer. Note that some subwoofer settings are not
available depending on other speaker settings.
Specifies the behavior of the subwoofer:
•
SUBWF 200
– Most of the bass frequencies are
played through the subwoofer
•
SUBWF 150
– Only the very lowest bass frequencies
are played through the subwoofer
•
SUBWF 100
– Mid setting
•
SUBWF PLS
– For extra bass power
•
SUBWF –––
– No sound from the subwoofer
• The
SUBWF PLS
setting is only available when the
front speakers are set to
FRONT L
.
• When all speakers are set to
L
, you cannot select the
SUBWF 200
, or
SUBWF 150
settings.
• If you set the front speakers to
FRONT S
, you cannot
select the
SUBWF –––
setting.
• Depending on the source and other receiver settings,
you may not always hear sound from the subwoofer.
RECEIVER
SYSTEM SETUP
ENTER
vsx-c402_MY.book 32 ページ ２００４年２月６日 金曜日 午後７時１９分
