Pioneer VSX-519V-K, Руководство по эксплуатации

Страница: 34 / 46

The System Setup menu 06
34
En
•
Center
(
C
) – Select
LARGE
if you r cente r
s p eake r r e pr oduces bass f r equencies
effectively, o r select
SMALL
to send bass
f r equencies to the othe r s p eake r s o r
subwoofe r . If you didn’t connect a cente r
s p eake r , choose
NO
(the cente r channel is
sent to the othe r s p eake r s).
•
Surround
(
S
) – Select
LARGE
if you r
su rr ound s p eake r s r e pr oduce bass
f r equencies effectively. Select
SMALL
to
send bass f r equencies to the othe r
s p eake r s o r subwoofe r . If you didn’t
connect su rr ound s p eake r s choose
NO
(the sound of the su rr ound channels is
sent to the othe r s p eake r s).
•
Subwoofer
(
SW
) – LFE signals and bass
f r equencies of channels set to
SMALL
a r e
out p ut f r om the subwoofe r when
YES
is
selected.
1
Choose the
PLUS
setting if you
want the subwoofe r to out p ut bass sound
continuously o r you want dee p e r bass (the
bass f r equencies that would no r mally
come out the f r ont and cente r s p eake r s a r e
also r outed to the subwoofe r ). If you did not
connect a subwoofe r choose
NO
(the bass
is out p ut f r om othe r s p eake r s).
Crossover network
• Default setting:
100Hz
This setting decides the cutoff between bass
sounds
p laying back f r om the s p eake r s
selected as
LARGE
, o r the subwoofe r , and bass
sounds p laying back f r om those selected as
SMALL
.
2
It also decides whe r e the cutoff will
be fo r bass sounds in the LFE channel.
1 Select ‘X.OVER’ from the SP SETUP menu.
2 Use
/
to choose the frequency
cutoff point.
F r equencies below the cutoff p oint will be sent
to the subwoofe r (o r
LARGE
s p eake r s).
Channel level
Using these settings, you can adjust the ove r all
balance of you r s p eake r system.
1 Select CH LEVEL from the SP SETUP menu.
2 Use
/
to select a setup option.
•
T. TONE M
– Move the test tone manually
f r om s p eake r to s p eake r and adjust
individual channel levels.
•
T. TONE A
– Adjust channel levels as the
test tone moves f r om s p eake r to s p eake r
automatically.
3 Confirm your selected setup option.
The test tones will sta r t afte r you pr ess
ENTER
.
3
4 Adjust the level of each channel using
/
.
If you selected
T. TONE M
, use
/
to switch
s p eake r s.
The
T. TONE A
setu p out p uts test tones in the
following o r de r (de p ends on s p eake r settings):
L

C

R

SR

SL

SW
Adjust the level of each s p eake r as the test tone
is emitted.
4
Note
1 If you can’t get good bass r esults, listen to the bass r es p onse with the subwoofe r set to
PLUS
and
YES
o r the f r ont s p eake r s
set to
LARGE
and
SMALL
alte r natively and let you r ea r s judge which sounds best. If you’ r e having pr oblems, the easiest o p tion
is to r oute all the bass sounds to the subwoofe r by selecting
SMALL
fo r the f r ont s p eake r s.
2 Fo r mo r e on selecting the s p eake r sizes, see S p eaker setting on p age 33.
3 Afte r the volume inc r eases to the r efe r ence level, test tones will be out p ut.
4 • If you a r e using a Sound P r essu r e Level (SPL) mete r , take the r eadings f r om you r main listening p osition and adjust the level
of each s p eake r to 75 dB SPL (C-weighting/slow r eading).
• The subwoofe r test tone is out p ut at low volumes. You may need to adjust the level afte r testing with an actual soundt r ack.
• You can change the channel levels at any time by pr essing
RECEIVER
fi r st and then sta r ting the following o p e r ations:
CH SELECT
and
CH /–
on the r emote cont r ol. You can also change the channel levels by pr essing
RECEIVER
fi r st and
then
TEST TONE
. In this case, use the
/
buttons to select the channel and use the
/
buttons to adjust the level.
VSX_519V_WDWP.book 34 ページ ２００９年１月２０日 火曜日 午前１１時２０分