Pioneer VSX-430-K, Руководство по эксплуатации

Страница: 29 / 40

4
5
5
29
Chapter
33
6
Home Menu
Using the Home Menu
The following section shows you how to make detailed
settings to specify how you’re using the receiver, and also
explains how to fine-tune individual speaker system settings
to your liking.
Important
• The OSD will not appear if you have connected using the
composite output to your TV. Use HDMI connections for
Home Menu.
• If headphones are connected to the receiver, disconnect
them.
• You can’t use the Home Menu when the
USB
input is
selected.
1
Switch on the receiver and your TV.
Press

RECEIVER to switch on.
2
Switch the TV input to the input that connects this
receiver to the TV through the corresponding HDMI
cable.
3
Press , then press
HOME MENU
.
The Home Menu appears on your TV. Use /// and
ENTER on the remote control to navigate through the
screens and select menu items. Press RETURN to exit
the current menu.
• Press HOME MENU at any time to exit the Home
Menu.
4
Select the setting you want to adjust.
•
Manual SP Setup
-
Speaker Setting
– Specify the size and number of
speakers you’ve connected (see below).
-
X.Over
– Specify which frequencies will be sent to the
subwoofer ( page 30 ).
-
Channel Level
– Adjust the overall balance of your
speaker system ( page 30 ).
-
Speaker Distance
– Specify the distance of your
speakers from the listening position ( page 31 ).
•
Input Assign
– Specify what you’ve connected to the
ANALOG IN1
audio input (see The Input Assign menu on
page 31 ).
•
Auto Power Down
– Sets to automatically turn off the
power when the receiver has not operated for several hours
(see The Auto Power Down menu on page 31 ).
•
HDMI Setup
– Set the audio return channel function and
set the HDMI input signal to Standby Through output or not
during standby (see The HDMI Setup menu on page 32 ).
Manual speaker setup
This receiver allows you to make detailed settings to optimize
the surround sound performance. You only need to make
these settings once (unless you change the placement of your
current speaker system or add new speakers).
Speaker Setting
Use this setting to specify your speaker configuration (size,
number of speakers).
1
Select ‘Manual SP Setup’ from the Home Menu.
2
Select ‘Speaker Setting’ from the Manual SP Setup
menu.
3
Choose the set of speakers that you want to set then
select a speaker size.
Use / to select the size (and number) of each of the
following speakers:
•
Front
– Select
LARGE
if your front speakers reproduce bass
frequencies effectively, or if you didn’t connect a
subwoofer. Select
SMALL
to send the bass frequencies to
the subwoofer.
•
Center
– Select
LARGE
if your center speaker reproduces
bass frequencies effectively, or select
SMALL
to send bass
frequencies to the other speakers or subwoofer. If you
didn’t connect a center speaker, choose
NO
(the center
channel is sent to the other speakers).
•
Surr
– Select
LARGE
if your surround speakers reproduce
bass frequencies effectively. Select
SMALL
to send bass
frequencies to the other speakers or subwoofer. If you
didn’t connect surround speakers choose
NO
(the sound of
the surround channels is sent to the other speakers).
RECEIVER
H o m e M e nu
1 . Manual SP Setup
2.Input Assign
3.Auto Power Down
4.HDMI Setup
R e t u r n
1.Manual SP Setup
Return
a.Speaker Setting
b.X.Over
c.Channel Level
d.Speaker Distance
1a.Speaker Setting
Front
Center
Surr
Subwoofer:
Return
[ NO ]
[ NO ]
YES
SMALL