background image

4

Additional information

6

6

38

33

6

However, parties who have received copies, or rights, from you under 

this License will not have their licenses terminated so long as such 

parties remain in full compliance.

5. You are not required to accept this License, since you have not signed 

it. However, nothing else grants you permission to modify or 

distribute the Program or its derivative works. These actions are 

prohibited by law if you do not accept this License. Therefore, by 

modifying or distributing the Program (or any work based on the 

Program), you indicate your acceptance of this License to do so, and 

all its terms and conditions for copying, distributing or modifying the 

Program or works based on it.

6. Each time you redistribute the Program (or any work based on the 

Program), the recipient automatically receives a license from the 

original licensor to copy, distribute or modify the Program subject to 

these terms and conditions. You may not impose any further 

restrictions on the recipients' exercise of the rights granted 

herein.You are not responsible for enforcing compliance by third 

parties to this License.

7. If, as a consequence of a court judgment or allegation of patent 

infringement or for any other reason (not limited to patent issues), 

conditions are imposed on you (whether by court order, agreement or 

otherwise) that contradict the conditions of this License, they do not 

excuse you from the conditions of this License. If you cannot 

distribute so as to satisfy simultaneously your obligations under this

License and any other pertinent obligations, then as a consequence 

you may not distribute the Program at all. For example, if a patent 

license would not permit royalty-free redistribution of the Program by 

all those who receive copies directly or indirectly through you, then 

the only way you could satisfy both it and this License would be to 

refrain entirely from distribution of the Program.

If any portion of this section is held invalid or unenforceable under 

any particular circumstance, the balance of the section is intended to 

apply and the section as a whole is intended to apply in other 

circumstances.

It is not the purpose of this section to induce you to infringe any 

patents or other property right claims or to contest validity of any such 

claims; this section has the sole purpose of protecting the integrity of 

the free software distribution system, which is implemented by public 

license practices. Many people have made generous contributions to 

the wide range of software distributed through that system in reliance 

on consistent application of that system; it is up to the author/donor 

to decide if he or she is willing to distribute software through any 

other system and a licensee cannot impose that choice.

This section is intended to make thoroughly clear what is believed to 

be a consequence of the rest of this License.

8. If the distribution and/or use of the Program is restricted in certain 

countries either by patents or by copyrighted interfaces, the original 

copyright holder who places the Program under this License may add 

an explicit geographical distribution limitation excluding those 

countries, so that distribution is permitted only in or among countries 

not thus excluded. In such case, this License incorporates the 

limitation as if written in the body of this License.

9. The Free Software Foundation may publish revised and/or new 

versions of the General Public License from time to time. Such new 

versions will be similar in spirit to the present version, but may differ 

in detail to address new problems or concerns.

Each version is given a distinguishing version number. If the Program 

specifies a version number of this License which applies to it and "any 

later version", you have the option of following the terms and 

conditions either of that version or of any later version published by 

the Free Software Foundation. If the Program does not specify a 

version number of this License, you may choose any version ever 

published by the Free Software Foundation.

10. If you wish to incorporate parts of the Program into other free 

programs whose distribution conditions are different, write to the 

author to ask for permission. For software which is copyrighted by the 

Free Software Foundation, write to the Free Software Foundation; we 

sometimes make exceptions for this. Our decision will be guided by 

the two goals of preserving the free status of all derivatives of our free 

software and of promoting the sharing and reuse of software 

generally.

NO WARRANTY

11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE 

IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED 

BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN 

WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES 

PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY 

KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT 

LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY 

AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS 

TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH 

YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME 

THE COST OF ALL NECESSARY SERVICING, REPAIR OR 

CORRECTION.

12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR 

AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY 

OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE 

PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR 

DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR 

CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR 

INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED 

TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR 

LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF 

THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN 

IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE 

POSSIBILITY OF SUCH DAMAGES.

END OF TERMS AND CONDITIONS

How to Apply These Terms to Your New Programs

If you develop a new program, and you want it to be of the greatest 

possible use to the public, the best way to achieve this is to make it free 

software which everyone can redistribute and change under these terms

To do so, attach the following notices to the program. It is safest to attach 

them to the start of each source file to most effectively convey the 

exclusion of warranty; and each file should have at least the "copyright" 

line and a pointer to where the full notice is found.

<one line to give the program's name and a brief idea of what it 

does.>

Copyright (C) <year> <name of author>

This program is free software; you can redistribute it and/or modify it 

under the terms of the GNU General Public License as published by 

the Free Software Foundation; either version 2 of the License, or (at 

your option) any later version.

This program is distributed in the hope that it will be useful, but 

WITHOUT ANY WARRANTY; without even the implied warranty of 

MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See 

the GNU General Public License for more details.

You should have received a copy of the GNU General Public License 

along with this program; if not, write to the Free Software Foundation, 

Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.

Also add information on how to contact you by electronic and paper mail.

If the program is interactive, make it output a short notice like this when 

it starts in an interactive mode:

Gnomovision version 69, Copyright (C) year name of author

Gnomovision comes with ABSOLUTELY NO WARRANTY; for details 

type `show w'.

This is free software, and you are welcome to redistribute it under 

certain conditions; type `show c' for details.

The hypothetical commands `show w' and `show c' should show the 

appropriate parts of the General Public License. Of course, the 

commands you use may be called something other than `show w' and 

`show c'; they could even be mouse-clicks or menu items--whatever suits 

your program.

You should also get your employer (if you work as a programmer) or your 

school, if any, to sign a "copyright disclaimer" for the program, if 

necessary. Here is a sample; alter the names:

Yoyodyne, Inc., hereby disclaims all copyright interest in the program 

`Gnomovision' (which makes passes at compilers) written by James 

Hacker.

<signature of Ty Coon>, 1 April 1989

Ty Coon, President of Vice

This General Public License does not permit incorporating your program 

into proprietary programs. If your program is a subroutine library, you 

may consider it more useful to permit linking proprietary applications 

with the library. If this is what you want to do, use the GNU Lesser General 

Public License instead of this License.

EOF

Содержание VSX-430-K









































Отзывы: