Pioneer TRAKTOR PRO CDJ-350, Руководство по обслуживанию

Страница: 46 / 97

46
CDJ-350
1 2 3 4
A
B
C
D
E
F
1 2 3 4
8 .3 USER SETABLE ITEMS
1. The adjustment value of the Cam plate should be adjusted to "0" (Refer to Fig. 1).
2. First, rotate the Jog dial 5 times or more. The value at this time should not be inluded in measurement.
The actual measurement should be done after this rotation.
3. Enters the the Jog load confirmation mode.
4. Rotate the Jog dial quickly, and the direction of the rotation should be clockwise.
5. The rotational speed, time and the judgement are displayed in the FL display (Refer to Fig. 2).
The decreasing time of the rotation speed from ×3 to ×1.5 ("the rotation decreasing time") is displayed only when the
maximum speed is ×7 or more.
Confirm that the average of 4 times of "the rotation decreasing time" is in the spec.
Spec: 80 ± 10 msec.
N ote: This spec (80 ± 10 msec) applied to only the process to fulfill the spec of the final product (80 ± 25 msec).
5. If "the rotation decreasing time" is not in the spec, change the adjustment value of the Cam plate and do the above
inspection
from N o. 3 to N o. 4 again.
To increase the load
To decrease
the load
Adjust to "0".
Cam plate
Fig. 1 Cam plate
Fig. 2 Example of displaying FL
Judgement Average of rotation
decreasing time
If it is outside the specified range (-1, -2, -3, +1, +2) , adjust the position of the Cam plate.
-1, -2, -3 : To decrease the load
+1, +2
: To increase the load
[Load adjustment method]
[Measuring method]
The following data have been set in each IC.
DYW1792 Flash ROM IC101 MAI N
DYW1792 Flash ROM IC101 MAI N
UTILITY setting
A. CUE LE V EL
AUTO STA N DBY
V ERSIO N N o.
MIDI CHA NN EL
TIME MODE
Statuses of keys
AUTO CUE
JOG MODE
TEMPO RA N GE ± 6 % / ±10 % / ±16 % / WIDE
MASTER TEMPO O N / OFF
-36 dB/-42 dB/-48 dB/
-54 dB/
-60 dB /-66 dB/
-72 dB/-78 dB
OFF/ 20 min /40 min/60 min
LIBRARY CREATOR LIBRARY /FOLDER
—
1 to 16
TIME/ REMAIN
O N / OFF
CDJ/ VINYL
Item for Which User's
Setting is Available
Part No. Part Name Ref No. Assy
Content to be
Stored
Setting Value (The factory default
settings are indicated in bold.)