Pioneer SX-SWR1, Руководство по эксплуатации

Страница: 48 / 136

Listening to your system 07
48
En
With multichannel sources, if you have
connected surround back speaker(s) and have
selected
SB ON , you can select (according to
format):
•
DOLBY PLIIx MOVIE
– See above (only
available when you’re using two surround
back speakers)
• DOLBY PLIIx MUSIC – See above
• DOLBY DIGITAL EX – Creates surround
back channel sound for 5.1 channel
sources and provides pure decoding for
6.1 channel sources (like Dolby Digital
Surround EX)
• DTS-ES – Allows you to hear 6.1 channel
playback with DTS-ES encoded sources
•
DTS NEO:6
– Allows you to hear 6.1
channel playback with DTS encoded
sources
Using surround back channel
processing
• Default setting:
SB ON
You can have the system automatically use 6.1
or 7.1 decoding for 6.1 encoded sources (for
example, Dolby Digital EX or DTS-ES), or you
can choose to always use 6.1 or 7.1 decoding
(for example, with 5.1 encoded material). With
5.1 encoded sources, a surround back channel
will be generated, but the material may sound
better in the 5.1 format for which it was
originally encoded (in which case, you can
simply switch surround back channel
processing off).
• With a 7.1-channel surround system, audio
signals that have undergone matrix
decoding processing through surround
back channel processing to which the Up
Mix function is added are output from the
surround back speakers.
• Press , then press SB CH
repeatedly to cycle the surround back
channel options.
Each press cycles through the options as
follows:
•
SB ON
– Matrix decoding processing for
generating the surround back component
from the surround component is turned on.
• SB AUTO – Matrix decoding processing for
generating the surround back component
from the surround component is switched
automatically. Matrix decoding processing
is only performed when surround back
channel signals are detected in the input
signals.
•
SB OFF
– Matrix decoding processing for
generating the surround back component
from the surround component is turned
off.
Setting the Up Mix function
In a 7.1-channel surround system with
surround speakers placed directly at the sides
of the listening position, the surround sound of
5.1-channel sources is heard from the side.
The Up Mix function mixes the sound of the
surround speakers with the surround back
speakers so that the surround sound is heard
from diagonally to the rear as it should be.
1
Note
1 • Set to
ON
regardless of this setting when playing DTS-HD signals.
• May automatically be set to
OFF
even when set to
ON
, depending on the input signal and listening mode.
SYSTEM TV CONTROL
CH
INPUT
CH
CH
EQ
PHASE SB CH
CH SELECT SLEEP
ENTER
MIDNGIHT
S.RETRIEVER
SHIFT
HTP-500_LXCN_En.book 48 ページ ２００９年１０月１日 木曜日 午後４時５８分