Listening to your system
07
49
En
English
Deutsch
Italiano
Español
Français
Nederlands
• Using the Up Mix function is effective when
the speakers in the 7.1-channel surround
system are set up as recommended in the
example below.
• Depending on the positions of the speakers
and the sound source, in some cases it
may not be possible to achieve good
results. In this case, set the setting to
OFF
.
1
Switch the system into standby.
2
While holding down the on the
front panel, and hold the
STANDBY/ON for
about two seconds.
UP MIX: OFF
appears and the Up Mix function
turns off. If you want to turn this function on,
perform steps 1 and 2 again.
• When set to
ON
, the
UP MIX
indicator on
the front panel lights.
Setting the Audio options
There are a number of additional sound
settings you can make using the
AUDIO
PARAMETER
menu. The defaults, if not stated,
are listed in bold.
Important
• Note that if a setting doesn’t appear in the
AUDIO PARAMETER
menu, it is
unavailable due to the current source,
settings and status of the system.
1
Press
on the remote control,
then press AUDIO PARAMETER button.
2
Use
/
to select the setting you want to
adjust.
Depending on the current status/mode of the
system, certain options may not be able to be
selected. Check the table below for notes on
this.
3
Use
/
to set it as necessary.
See the table below for the options available for
each setting.
4
Press RETURN to confirm and exit the
menu.
?
C
S
W
FL
FR
S
L
S
R
S
BL
S
BR
S
BL
S
BR
C
S
W
FL
FR
S
L
S
R
Up Mix OFF
Up Mix ON
TOP
MENU
HOME
MENU
RETURN
ST/MONO
SETUP
PTY SEARCH
AUDIO
PARAMETER
iPod CTRL
MASTER
VOLUME
TOOLS
MENU
ENTER
SYSTEM
SYSTEM
TV CONTROL
INPUT
INPUT SELECT
SOURCE
HTP-500_LXCN_En.book 49 ページ ２００９年１０月１日 木曜日 午後４時５８分
