Connecting up
02
22
En
Connecting other audio components
The number and kind of connections depends on the kind of component you’re connecting.
1
Follow the steps below to connect a CD-R, MD, DAT, tape recorder or other audio component.
1
Connect the analog audio outputs of the
component to a set of spare audio inputs on
this system.
Use a stereo RCA phono cable. If your
component has a digital output, connect this
to a digital input on the system as shown.
2
If you’re connecting a recorder, connect
the analog audio outputs to the analog audio
inputs on the recorder.
The example shows an analog connection to
the
AUX OUT
analog output jack using a
stereo RCA phono cable.
Note
1 Note that you must connect digital components to analog audio jacks if you want to record to/from digital
components (like an MD) to/from analog components.
1
1
2
ANALOG
R
L
AUDIO IN
ANALOG
R
L
AUDIO OUT
DIGITAL OUT
COAXIAL OPTICAL
1
2
Select one
CD-R, MD, DAT, etc.
HTP-500_LXCN_En.book 22 ページ ２００９年１０月１日 木曜日 午後４時５８分
