Using the tuner
06
43
En
English
Deutsch
Italiano
Español
Français
Nederlands
3
Press PRESET
/
to select the station
preset you want.
You can also use the number buttons.
4
Press ENTER.
After pressing
ENTER
, the preset number stop
blinking and the system stores the station.
Listening to station presets
You will need to have some presets stored to do
this. See
you haven’t done this already.
•
Press PRESET
/
to select the station
preset you want.
• You can also use the number buttons on the
remote control to recall the station preset.
Naming preset stations
For easier identification, you can name all of
your preset stations.
1
Choose the station preset you want to
name.
See
Listening to station presets
above for how
to do this.
2
Press TUNER EDIT twice.
The cursor at the first character position is
blinking on the display.
3
Input the name you want.
Choose a name up to eight characters long.
• Use the
PRESET
/
buttons to select
character position.
• Use the
TUNE
/
buttons to select
characters.
• The name is stored when
ENTER
is pressed.
Tip
• To erase a station name, follow steps 1 and
2, and press
ENTER
while the display is
blank. Press
TUNER EDIT
while the display
is blank, to keep the previous name.
• Once you have named a station preset,
press
DISPLAY
to show the name. When
you want to return to the frequency display,
press
DISPLAY
several times to show the
frequency.
HTP-500_LXCN_En.book 43 ページ ２００９年１０月１日 木曜日 午後４時５８分
