#
If you do not operate functions except for
ITS memo
and
TitleInput "A"
within about 30
seconds, the display is automatically returned to
the ordinary display.
Function and operation
Play mode
,
Random mode
,
Scan mode
,
Pause
,
Compression
and
TitleInput "A"
op-
erations are basically the same as that of the
built-in CD player.
Function name
Operation
Play mode
Refer to
Selecting a repeat play
range
on page 15.
But the repeat play ranges you can
select are different from that of the
built-in CD player. The repeat play
ranges of the multi-CD player are
as below:
!
M-CD repeat
–
Repeat all
discs in the multi-CD player
!
Track repeat
–
Repeat just the
current track
!
Disc repeat
–
Repeat the cur-
rent disc
Random mode
Refer to
Playing tracks in random
order
on page 15.
Scan mode
Refer to
Scanning folders and
tracks
on page 15.
Pause
Refer to
Pausing disc playback
on
page 16.
Compression
Refer to
Using compression and
BMX
on page 16.
Multi-CD player has DBE (dynamic
bass emphasis) function instead
of BMX.
The settings can be switched as
below:
COMP OFF
—
COMP 1
—
COMP 2
—
COMP OFF
—
DBE 1
—
DBE 2
ITS play mode
Refer to
Using ITS playlists
on this
page.
ITS memo
Refer to
Using ITS playlists
on this
page.
TitleInput "A"
Refer to
Entering disc titles
on
page 16.
Notes
!
If you select other discs during repeat play,
the repeat play range changes to
M-CD repeat
.
!
If you perform track search or fast forward/re-
verse during
Track repeat
, the repeat play
range changes to
Disc repeat
.
!
After track or disc scanning is finished, nor-
mal playback of the tracks will begin again.
!
When playing a CD TEXT disc on a CD TEXT
compatible multi-CD player, you cannot
switch to
TitleInput "A"
. The disc title has al-
ready been recorded on a CD TEXT disc.
Using ITS playlists
ITS (instant track selection) lets you make a
playlist of favorite tracks from those in the
multi-CD player magazine. After you have
added your favorite tracks to the playlist you
can turn on ITS play and play just those selec-
tions.
Creating a playlist with ITS programming
You can use ITS to enter and play back up to
99 tracks per disc from up to 100 discs (with
the disc titles). (With multi-CD players sold be-
fore the CDX-P1250 and CDX-P650, up to 24
tracks can be stored in the playlist.)
1
Play a CD that you want to program.
Push
MULTI-CONTROL
up or down to select
the CD.
2
Use MULTI-CONTROL to select
ITS memo in the function menu.
3
Select the desired track by pushing
MULTI-CONTROL left or right.
4
Push MULTI-CONTROL up to store the
currently playing track in the playlist.
Memory complete
is displayed and the cur-
rently playing selection is added to your play-
list.
Available accessories
En
51
English
Section
03
