Entering PIN code for Bluetooth
wireless connection
To connect your cellular phone to this unit via
Bluetooth wireless technology, you need to
enter PIN code on your phone to verify the
connection. The default code is
0000
, but you
can change this in this function.
!
With some Bluetooth audio players, you
may be required to enter to this unit in ad-
vance PIN code of your Bluetooth audio
player, in order to set this unit ready for a
connection from your Bluetooth audio
player.
!
Only when Bluetooth adapter (e.g. CD-
BTB100) is connected to this unit, you can
operate this function.
1
Use MULTI-CONTROL to select
Pin code input.
2
Push MULTI-CONTROL up or down to
select a number.
3
Push MULTI-CONTROL left or right to
move the cursor to the previous or next po-
sition.
4
After inputting PIN code (up to 16 di-
gits), press MULTI-CONTROL.
PIN code you entered is now standby to be
stored in memory.
When you press
MULTI-CONTROL
again on
the same display, the PIN code you entered is
stored in this unit.
#
Pushing
MULTI-CONTROL
right in the confir-
mation display returns you to the PIN code input
display, and you can change the PIN code.
Other Functions
Using the AUX source
This unit can control up to two auxiliary equip-
ments such as VCR or portable devices (sold
separately). When connected, auxiliary equip-
ments are automatically read in as AUX
sources and assigned to
AUX1
or
AUX2
. The
relationship between
AUX1
and
AUX2
sources is explained below.
About
AUX1
and
AUX2
You have two methods to connect auxiliary
equipments to this unit.
AUX1
source:
When connecting auxiliary equipment using a
stereo mini plug cable
%
Insert the stereo mini plug into the
input jack on this unit.
For more details, refer to the installation man-
ual.
The allocation of this auxiliary equipment is
automatically set to
AUX1
.
AUX2
source:
When connecting auxiliary equipment using an
IP-BUS-RCA Interconnector (sold separately)
%
Use an IP-BUS-RCA Interconnector such
as the CD-RB20/CD-RB10 (sold separetely)
to connect this unit to auxiliary equipment
featuring RCA output.
For more details, refer to the IP-BUS-RCA Inter-
connector owner
’
s manual.
The allocation of this auxiliary equipment is
automatically set to
AUX2
.
#
You can only make this type of connection if
the auxiliary equipment has RCA outputs.
Operating this unit
En
28
Section
02