Note
Listening AM radio while connecting iPod to this
unit may generate noise. In this case, disconnect
iPod from this unit and noise is disappeared.
Storing and recalling broadcast
frequencies
You can easily store up to six broadcast fre-
quencies for later recall.
!
Up to 18 FM stations, six for each of the
three FM bands, and six AM stations can
be stored in memory.
1
When you find a frequency that you
want to store in memory press LIST.
2
Use MULTI-CONTROL to store the se-
lected frequency in memory.
Turn to change the preset number; press and
hold to store.
The preset number you have selected will
flash and then remain lit. The selected radio
station frequency has been stored in memory.
3
Use MULTI-CONTROL to select the de-
sired station.
Turn to change the station; press to select.
#
You can also change the station by pushing
MULTI-CONTROL
up or down.
#
If you do not operate the list within about 30
seconds, the display is automatically returned to
the ordinary display.
Using the remote control
%
When you find a frequency that you
want to store in memory, press one of pre-
set tuning buttons 1 to 6 and hold until the
preset number stops flashing.
The number you have pressed will flash in the
preset number indicator and then remain lit.
The selected radio station frequency has been
stored in memory.
The next time you press the same preset tun-
ing button the radio station frequency is re-
called from memory.
#
You can also recall radio station frequencies
assigned to preset tuning numbers by pushing
MULTI-CONTROL
up or down during the fre-
quency display.
Introduction of advanced
operations
1
Press MULTI-CONTROL to display the
main menu.
FUNCTION
,
AUDIO
and
ENTERTAINMENT
appear on the display.
2
Use MULTI-CONTROL to select
FUNCTION.
Turn to change the menu option; press to se-
lect.
The function name appears on the display.
3
Turn MULTI-CONTROL to select the
function.
Turn
MULTI-CONTROL
to switch between the
functions in the following order:
BSM
(best stations memory)
—
Local
(local
seek tuning)
#
You can also select the function by pressing
FUNCTION
on the remote control.
#
To return to the frequency display, press
BAND
.
#
If you do not operate functions within about
30 seconds, the display is automatically returned
to the ordinary display.
Storing the strongest broadcast
frequencies
BSM (best stations memory) lets you automa-
tically store the six strongest broadcast fre-
quencies under
1
to
6
on the remote control
and once stored there you can tune in to those
frequencies with the touch of a button.
!
Storing broadcast frequencies with BSM
may replace broadcast frequencies you
have saved using
1
to
6
on the remote con-
trol.
Operating this unit
En
12
Section
02
