+6
to
–
6
is displayed as the level is increased
or decreased.
#
You can then select another band and adjust
the level.
5
Press BAND to cancel the 7-band gra-
phic equalizer adjustment.
Adjusting loudness
Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1
Use MULTI-CONTROL to select LOUD.
2
Press MULTI-CONTROL to turn loudness
on.
Loudness level (e.g.,
Mid
) appears in the dis-
play.
#
To turn loudness off, press
MULTI-CONTROL
again.
3
Push MULTI-CONTROL left or right to
select a desired level.
Each time
MULTI-CONTROL
is pushed left or
right, level is selected in the following order:
Low
(low)
—
Mid
(mid)
—
High
(high)
Using subwoofer output
This unit is equipped with a subwoofer output
which can be turned on or off.
1
Use MULTI-CONTROL to select Sub W.1.
#
You can also select the subwoofer setting
menu by pressing
SW
on the unit.
2
Press MULTI-CONTROL to turn subwoo-
fer output on.
Normal
appears in the display. Subwoofer out-
put is now on.
#
To turn subwoofer output off, press
MULTI-CONTROL
again.
3
Push MULTI-CONTROL left or right to
select the phase of subwoofer output.
Push
MULTI-CONTROL
left to select reverse
phase and
Reverse
appears in the display.
Push
MULTI-CONTROL
right to select normal
phase and
Normal
appears in the display.
Adjusting subwoofer settings
When the subwoofer output is on, you can ad-
just the cut-off frequency and the output level
of the subwoofer.
1
Use MULTI-CONTROL to select Sub W.2.
#
You can also select the subwoofer setting
menu by pressing
SW
on the unit.
#
When the subwoofer output is on, you can se-
lect
Sub W.2
.
2
Push MULTI-CONTROL left or right to
select cut-off frequency.
Each time
MULTI-CONTROL
is pushed left or
right, cut-off frequencies are selected in the
following order:
50Hz
—
63Hz
—
80Hz
—
100Hz
—
125Hz
Only frequencies lower than those in the se-
lected range are outputted from the subwoo-
fer.
3
Push MULTI-CONTROL up or down to
adjust the output level of the subwoofer.
Each time
MULTI-CONTROL
is pushed up or
down, subwoofer level increases or decreases.
+6
to
–
24
is displayed as the level is increased
or decreased.
Boosting the bass
Bass boost function boosts the bass level of
sound lower than 100 Hz. The more the bass
level is increased, the more the bass sound is
emphasized and the entire sound becomes
powerful. When using this function with the
subwoofer, the sound under the cut-off fre-
quency is boosted.
1
Use MULTI-CONTROL to select Bass.
#
You can also select the bass boost setting by
pressing and holding
SW
.
Operating this unit
En
23
English
Section
02
