4
Press MULTI-CONTROL to connect the
selected cellular phone.
While connecting,
Connecting
flashes. To
complete the connection, please check the de-
vice name (
Pioneer BT Unit
) and enter the
link code on your cellular phone. If the con-
nection is established,
Connected
is dis-
played.
#
The link code is set to
0000
as default. You
can change this code in the initial setting. Refer
to
Entering PIN code for Bluetooth wireless con-
nection
on page 28.
Using a cellular phone to initiate a
connection
1
Use MULTI-CONTROL to select
Connection open in the function menu.
2
Press MULTI-CONTROL to open the con-
nection.
Always waiting
is displayed and the unit is
now on standby for connection from cellular
phone.
3
Use cellular phone to connect to this
unit.
#
The link code is set to
0000
as default. You
can change this code in the initial setting. Refer
to
Entering PIN code for Bluetooth wireless con-
nection
on page 28.
Disconnecting a cellular phone
1
Use MULTI-CONTROL to select
Disconnect phone in the function menu.
Device name of the connected phone appears
in the display.
2
Press MULTI-CONTROL to disconnect a
cellular phone from this unit.
After the disconnection is completed,
Disconnected
is displayed.
Registering connected cellular
phone
1
Use MULTI-CONTROL to select
Set phone in the function menu.
2
Push MULTI-CONTROL up or down to
select a registration assignment.
P1
(user phone 1)
—
P2
(user phone 2)
—
P3
(user phone 3)
—
G1
(guest phone 1)
—
G2
(guest phone 2)
#
As you select each assignment, you can see
whether or not a phone is already registered
there. If the assignment is empty,
No data
is dis-
played. If the assignment is already taken, the de-
vice name appears. To replace an assignment
with a new phone, first delete the current assign-
ment. For more detailed instructions, see
Deleting
a registered phone
on this page.
3
Press MULTI-CONTROL to register the
currenctly connected phone.
When the registration is completed,
Reg. Completed
is displayed.
#
If the registration failed,
Reg. ERROR
is dis-
played. In this case, return to step 1 and try
again.
Deleting a registered phone
1
Use MULTI-CONTROL to select
Delete phone in the function menu.
2
Push MULTI-CONTROL up or down to
select a registration assignment.
P1
(user phone 1)
—
P2
(user phone 2)
—
P3
(user phone 3)
—
G1
(guest phone 1)
—
G2
(guest phone 2)
#
If the assignment is empty,
No data
is dis-
played and the operation is not possible.
#
If you need to know the BD (Bluetooth Device)
address of the phone, push
MULTI-CONTROL
left
here.
3
Push MULTI-CONTROL right to select
Delete YES.
Delete YES
is displayed. Deleting phone is
now on standby.
Available accessories
En
44
Section
03
