33
PRV-LX10
En
English
Recording
The recording function involves inputting video/audio
signals from a VTR or other video playback device
(“external VTR”), converting those signals to data
compatible with the DVD video format, and recording
that data on the hard disk or a DVD-R/RW disc. A
playback video/audio signal is simultaneously output. If
the
SET UP
section
=
[
Operation
]
=
[
Video
Settings
]
=
[
Composite Out
] is set to
“Source
Monitor”
, the input image will be passed through
during recording as well (see page 32). In addition, in
the event this command is set to
“Decoder Out”
, the
output signal will be the encoded/decoded version of
the original input video/audio signal.
Note 1:
The playback video signal is delayed about 4 seconds
with respect to the input signal due to the time
required for encoding and decoding.
Note 2:
Recording will not begin if a copy-guard protected
input signal is detected.
Note 3:
If [
Composite Out
] is set to
“Source Monitor”
(pass-through output), when OSD is set to ON during
recording, the video and audio will switch to
“Decoder Out”
(encode/decode output).
Note 4:
Turn off the power of the recorder and then turn it
back on again if the disc does not come out even
when a drive error has occurred.
Selecting the TV System Mode
Select the TV system mode for recording. When [
TV
System
] is selected on the
STATUS
section of the
Function Menu
, the selectable TV systems are
displayed. Using the
CURSOR
button and
ENTER
button, select either
“NTSC”
or
“PAL”
. When
changing from the currently selected system, a
confirmation dialogue box will be displayed.
STATUS section
=
[TV System]
Drive indicators
