Pioneer PDA-5003 Скачать руководство пользователя страница 93

Страница: 93 / 213

Before Beginning Adjustments

Integrator Mode

This mode provides an adjustment function for integrator options.

This mode has white-balance adjustment and various detailed settings in addition to the items in the menu mode.

For details, refer to section 5.4, “Integrator Mode” (pg. 154).

RS-232C Adjustment

In this mode, a personal computer is used to perform various adjustments and settings.

There are some items that can only be configured in this mode.

For details, refer to section 5.5, “RS-232C Adjustment” (pg. 192).

5.1.2 Combined Use of the Remote Control, Main-control Panel, and RS-232C Commands

• The remote control and main-control panel can be operated together.

(Example) It is possible to access the Menu Mode using the main-control panel then perform an adjustment

using the remote control.

• With the remote-control (or main-control panel) buttons and RS-232C commands, the most resent control has priority.

In this mode, when performing some settings, an ID must be assigned at the start.

Note

Содержание PDA-5003






















































































































































































































Результаты поиска

Содержание PDA-5003

Отзывы:

Похожие инструкции для PDA-5003

Бренды по названию

Популярные бренды

Pioneer PDA-5003, Техническое руководство

Результаты поиска

Содержание PDA-5003

Отзывы:

Похожие инструкции для PDA-5003

Бренды по названию

Популярные бренды