Pioneer PDA-5003 Скачать руководство пользователя страница 1

Страница: 1 / 213

PLASMA DISPLAY MONITOR: PDP-425CMX/PDP-42MXE10

VIDEO CARD: PDA-5003/PDA-5004

TABLE TOP STAND: PDK-TS01

TILT MOUNT UNIT: PDK-5011

WALL MOUNT UNIT: PDK-WM01

CEILING MOUNT UNIT: PDK-5012

MOBILE CART: PDK-5014

SPEAKER SYSTEM: PDP-S44-LR

ABOUT MOUNTING/INSTALLATION

This product is sold under the assumption that

installation will be performed by experienced,

qualified experts. Refer all mounting and

installation work to qualified personnel, or consult

the nearest PIONEER dealer for assistance.

We accept no responsibility for accident or loss

resulting from failure to select an appropriate

installation site, or for those occurring during

assembly, installation, mounting, or operation of

this product, or resulting from modifications made

to this product, or from natural disasters.

PRECAUTIONS:

• We accept no responsibility for losses resulting from

the use of parts other than those supplied by us.

• We guarantee the performance of our products only

when they are assembled and adjusted as described in

this manual.

• The specifications and external designs shown in this

manual are subject to change without notice.

CAUTION

Exclamation marks placed within triangles are

intended to alert users to the presence of important

safety information. Be sure to read instructions

indicated by this symbol.

This manual provides precautions and information for installation, preparation, and handling of the Plasma Display and

its dedicated mounting hardware.

Before installation and preparatory work, choose a safe and appropriate site after thorough consideration of construction,

materials used, strength, and surroundings. If adequate safeguards are not in place, immediately halt the installation

process and discontinue marketing activities.

TECHNICAL MANUAL

(Ver. 1.0)

FOR PIONEER PLASMA DISPLAY MONITOR WHEN USED WITH

VIDEO CARDS (EXPANSION SOLUTIONS CARDS)

Содержание PDA-5003






















































































































































































































Результаты поиска

Содержание PDA-5003

Отзывы:

Похожие инструкции для PDA-5003

Бренды по названию

Популярные бренды

Pioneer PDA-5003, Техническое руководство

Результаты поиска

Содержание PDA-5003

Отзывы:

Похожие инструкции для PDA-5003

Бренды по названию

Популярные бренды