Additional information
12
78
En
Resetting the system
Use this procedure to reset all system settings
(except for station memory) to the factory
default.
1 Switch the system into standby.
2 Press and hold the top panel
(Stop)
button for about 8 seconds until the
display shows ‘Mem.Clr.?’.
3 Press the top panel
button.
The system’s settings are now reset, and you
should see the ‘Welcome to Pioneer DVD !’
screen.
Dimming the display
• Default setting:
3
The display has three brightness levels (
1–3
).
1 Press DIMMER to change the
brightness level of the display unit.
Using and taking care of discs
Titles, groups, chapters and tracks
DVD discs are generally divided into one or
more titles. Titles may be further subdivided
into chapters.
DVD-Audio discs are divided into one or more
groups that can each contain a number of
tracks.
CDs, SACDs and Video CDs are divided into
tracks.
CD-ROMs contain folders and files. MP3 files
are referred to as tracks. Folders may contain
further folders.
DVD Video regions
All DVD Video discs carry a region mark on
the case somewhere that indicates which
region(s) of the world the disc is compatible
with. Your DVD system also has a region
mark, which you can find on the rear panel.
Discs from incompatible regions will not play
in this player. Discs marked
ALL
will play in
any player.
The diagram below shows the various DVD
regions of the world.
Handling discs
When holding discs of any type, take care not
to leave fingerprints, dirt or scratches on the
disc surface. Hold the disc by its edge or by
the center hole and edge.
Title 1
Title 2
Title 3
Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 1 Chapter 2
Group 1
Group 2
Group 3
Track 1
Track 2
Track 3
Track 1
Track 1
Track 2
Track 1
Track 2
Track 3
Track 4
Track 5
Track 6
Folder A
Folder B
Folder C
Track 1
Track 2
Track 3
Track 1
File 1
File 2
.mp3
.mp3
.mp3
.mp3
.jpg
.jpg
HTS.book Page 78 Monday, June 2, 2003 2:28 PM