Pioneer DVH-P4050MP, Руководство по эксплуатации

Страница: 46 / 66

Switching the auxiliary setting
Auxiliary devices connected to this unit can be
activated individually. Set each AUX source to
ON when using. For more information about
connecting or using auxiliary devices, refer to
Using the AUX source on the next page.
Switching the auxiliary 1 setting
1 Press FUNCTION to select AUX1.
2 Press
c
or
d
to select desired setting.
!
VIDEO
–
an iPod with video capabilities
connected with 4-pole mini plug cable (e.g.,
CD-V150M)
!
AUDIO
–
auxiliary device connected with
stereo mini plug cable
!
OFF
–
No auxiliary device is connected
Switching the auxiliary 2 setting
1 Press FUNCTION to select AUX2.
2 Press
a
or
b
to turn AUX2 on or off.
Setting the AV input
You can connect AV components to the AV
input with an RCA cable.
Switch the AV input setting according to the
connected AV component.
For more details, refer to the installation man-
ual.
!
Select
EXT-V
to watch video of a connected
video unit as EXTERNAL source.
!
Select AUX to watch video of an auxiliary
device as
AUX2
source.
1 Press FUNCTION to select V.IN.
2 Press
c
or
d
to select your desired set-
ting.
!
OFF
–
No video component connected
!
EXT-V
–
External video unit
!
AUX
–
Auxiliary device
#
To watch video of
AUX
source, set auxiliary 2
setting on. For details, refer to Switching the aux-
iliary setting on this page.
Setting the rear output and
subwoofer controller
This unit
’
s rear output (rear speaker leads out-
put and RCA rear output) can be used for full-
range speaker (
R-SP FULL
) or subwoofer
( R-SP S/W ) connection. If you switch the rear
output setting to
R-SP S/W
, you can connect a
rear speaker lead directly to a subwoofer with-
out using an auxiliary amp.
Initially, the unit is set for rear full-range speak-
er connection (
R-SP FULL ). When rear output
is connected to full range speakers (when
R-SP FULL
is selected), you can connect other
full range speakers ( P/O FULL ) or a subwoofer
( P/O S/W ) to the RCA rear output.
1 Press FUNCTION to select R-SP.
2 Press
a
or
b
to switch the rear output
setting.
Pressing
a
or
b
will switch between
R-SP FULL (full-range speaker) and R-SP S/W
(subwoofer) and that status will be displayed.
#
When no subwoofer is connected to the rear
output, select
R-SP FULL
.
#
When a subwoofer is connected to the rear
output, set for subwoofer
R-SP S/W
.
#
When the rear output setting is R-SP S/W , you
cannot operate the following procedure.
3 Press
c
or
d
to switch the subwoofer
output or rear output.
Pressing
c
or
d
will switch between
P/O S/W
and
P/O FULL
and that status will be dis-
played.
Notes
!
Even if you change this setting, there is no
output unless you turn the subwoofer output
on (refer to
Using subwoofer output on page
39).
!
If you change this setting, subwoofer output
in the audio menu return to the factory set-
tings.
Operating this unit
En
46
Section
03