Pioneer DVH-P4050MP, Руководство по эксплуатации

Страница: 39 / 66

1 Press AUDIO to select LOUD.
2 Press
a
to turn loudness on.
Loudness level (e.g.,
LOUD MID
) appears in
the display.
#
To turn loudness off, press
b
.
3 Press
c
or
d
to select a desired level.
LOW
(low)
—
MID
(mid)
—
HIGH
(high)
Using subwoofer output
This unit is equipped with a subwoofer output
which can be turned on or off.
1 Press SW to select SUB.W.
#
You can also select the subwoofer setting
menu by pressing AUDIO on the unit.
2 Press
a
to turn subwoofer output on.
SUB.W NOR appears in the display. Subwoo-
fer output is now on.
#
If the subwoofer output phase has been set to
the reverse,
SUB.W REV
will be displayed.
#
To turn subwoofer output off, press
b
.
3 Press
c
or
d
to select the phase of sub-
woofer output.
Press
c
to select reverse phase and REV ap-
pears in the display. Press
d
to select normal
phase and NOR appears in the display.
Adjusting subwoofer settings
When the subwoofer output is on, you can ad-
just the cut-off frequency and the output level
of the subwoofer.
1 Press SW to select 80HZ 0.
#
You can also select the subwoofer setting
menu by pressing AUDIO on the unit.
#
When the subwoofer output is on, you can se-
lect 80HZ 0 (subwoofer setting).
2 Press
c
or
d
to select cut-off frequency.
50HZ
—
63HZ
—
80HZ
—
100HZ
—
125HZ
Only frequencies lower than those in the se-
lected range are outputted from the subwoo-
fer.
3 Press
a
or
b
to adjust the output level
of the subwoofer.
+6
to
–
24
is displayed as the level is increased
or decreased.
Boosting the bass
Bass boost function boosts the bass level of
sound.
1 Press AUDIO to select BASS.
#
You can also select the bass boost setting by
pressing and holding SW .
2 Press
a
or
b
to select a desired level.
0 to +6 is displayed as the level is increased or
decreased.
Using the high pass filter
When you do not want low sounds from the
subwoofer output frequency range to play
from the front or rear speakers, turn on the
HPF (high pass filter). Only frequencies higher
than those in the selected range are output
from the front or rear speakers.
1 Press AUDIO to select HPF.
2 Press
a
to turn high pass filter on.
HPF 80HZ
appears in the display. High pass
filter is now on.
#
If the high pass filter has been previously ad-
justed, the frequency of that previously selected
will be displayed instead of
HPF 80HZ .
#
To turn high pass filter off, press
b
.
3 Press
c
or
d
to select cut-off frequency.
50HZ
—
63HZ
—
80HZ
—
100HZ
—
125HZ
Only frequencies higher than those in the se-
lected range are outputted from the front or
rear speakers.
Operating this unit
En
39
Section
03
Operating
this
unit