Pioneer DV-626D, Руководство по эксплуатации

Страница: 33 / 132

33
En
English
About source audio output
When the source input mode has been switched between the 5.1 Channel and 2 Channel mode settings using the
[Audio Out] setting in the Setup screen
Audio 2 menu or by pressing 5.1 CH MODE on the front panel, audio output
for each source will be as shown on the following table.
Setting Your Speaker System
for Multichannel Audio
Playback
This player player contains a built-in decoder for Dolby
Digital and DTS audio sources as well as 5.1 channel
discrete audio output. Ideally, a 5.1 channel system
contains 6 speakers: 2 front speakers, 2 surround
speakers, a center speaker, and a sub woofer. However,
as this is not always the case, accurately setting the
[Speaker Setting] setting to reflect your speaker setup
allows the player’s built-in decoder to reroute signals to
compensate for absent speakers.
Make adjustments in the [Speaker Setting] setting in the
Setup screen
Audio 2 menu.
Notes
• If you have already completed the Setup Navigator screen
operations, the settings on this page have already been set by
the player.
• If you have not made connections to the AUDIO OUT (5.1ch)
jacks on the rear panel of the player, it is not necessary to
make any changes to this setting.
1
Use the cursor buttons (
2
/
3
) to select the
speaker.
Every time the cursor button is pressed, the
selected speaker changes in the following order.
Speaker Setting
Center
On
Audio2 General Language Video 1
–/+
SETUP
Move
Exit
ENTER
Select
Speaker
Return
L R
SW
LS RS
• • •
3
Center
2
3
Surround
2 3
Sub-woofer
2
AUDIO
CONTENTS
OUTPUT
MODE
AUDIO OUT (2 CH) AUDIO OUT (5.1 CH) DIGITAL OUTPUT (S/PDIF)
L,R Front L,R Center Surround L, R Dolby Digital 3 PCM Dolby Digital Sub Woofer
DVD
Dolby
Digital
MUTE
MUTE
MUTE
MUTE
MUTE
MUTE
MUTE
MUTE MUTE
MUTE
MUTE
MUTE
MUTE
MUTE
MUTE
MUTE
MUTE
MUTE
Front Lch, Rch
5.1 ch MODE Front Lch, Rch Front Lch, Rch Surround Lch Rch LFE MUTE Dolby Digital
2 CH MODE
2 ch DOWNMIX
L ch, R ch
2 ch DOWNMIX
L ch, R ch
*1 L ch, R ch Dolby Digital
CD
DTS
LPCM
Dolby
Digital
Karaoke
2 ch DOWNMIX
L ch, R ch
2 ch DOWNMIX
L ch, R ch
Dolby Digital
L ch, R ch
*2 DTS
*2 DTS
Lch, Rch
Lch, Rch
MUTE
L ch, R ch
*2 DTS
*2 DTS
Lch, Rch
Lch, Rch
5.1 ch/2 ch
MODE
5.1 ch MODE
5.1 ch/2 ch
MODE
5.1 ch MODE
2 CH MODE
5.1 ch/2 ch
MODE
L ch, R ch
Lch, Rch Lch, Rch
Lch, Rch Lch, Rch
L ch, R ch
Video CD
MUTE MUTE MUTE
2 CH MODE
2 ch DOWNMIX
L ch, R ch
2 ch DOWNMIX
L ch, R ch
L ch, R ch Dolby Digital
Center
2 ch DOWNMIX
L ch, R ch
2 ch DOWNMIX
L ch, R ch
Front Lch, Rch Surround Lch Rch LFE Center
2
Use the cursor button (
∞
) to move the
cursor down to the speaker bar and use
the cursor buttons (
2
/
3
) to select “On”
or “Off” corresponding to whether the
selected speaker is present in your
system or not, respectively.
Notes
• To help identify the speakers being selected, the initials
of the speakers in the speaker system representation on
the right side of the screen will appear in blue.
• When “On” is selected for a speaker or pair of speakers,
the icons for those speakers turn yellow in the speaker
system representation on the right side of the screen.
• If “Off” is selected for both [Center Speaker] and
[Surround Speaker], [Sub-woofer] is automatically set to
“Off”.
• When the sub woofer is “On”, the low range
components of the center and surround signals will be
mixed in the LFE signal and output from the SUB
WOOFER jack.
• When the sub woofer is “Off”, the low range
components of the center and surround signals will be
mixed in the L and R signals and output from the front
speakers.
• Speakers in this menu setting can also be turned on and
off using CENTER , SURROUND , and SUB WOOFER on
the front panel. However, these buttons do not work
when the GUI indicator is lit.
* 1 When the VIRTUAL DOLBY DIGITAL indicator is lit, PCM output is muted.
* 2 When the Setup screen
Audio 1 menu [DTS Out] setting is set to “Off”, DTS digital output is muted.
Speaker Setting
Center
On
Audio2 General Language Video 1
–/+
SETUP
Move
Exit ENTER Select
Speaker
Return
L R
SW
LS RS