24
En
Setup Navigator
Audio1
General
Language
Video
2
Move
Exit
SETUP
Select
ENTER
Confirm setup adjustments
Exit Setup Navigator
Redo
Invalid
Valid
Note
• When a DVD is played back in the letter box format, Linear
PCM digital audio playback is output is automatically
downsampled to 48 kHz (when the original signal is 96 kHz). In
order to hear audio at the sampling rate of 96 kHz, set the
Setup screen
Video
menu [TV Screen] setting to either
“Wide” or “4:3 (Pan & Scan)” (page 34).
Confirming the settings
The [Exit Setup Navigator] is the final screen in the Setup
Navigator.
Settings:
Valid*
Select to have the player make all of the
necessary audio, video and language settings
automatically.
Invalid
Select to exit the Setup Navigator without
changing any of the system settings.
Redo
Select to return to the [OSD Language] screen
of the Setup Navigator and do the settings
again.
* Factory setting
To exit the Setup screen
When you have completed setting up the player using
the Setup Navigator or if you exit the Setup Navigator,
the Setup screen
General
menu appears. Press
Setup
to close the Setup screen.
To change other player settings in the Setup
screen menus
The procedure for changing the settings in the Setup
screen menus is described on page 29.
Setting digital audio connections
to an AV amplifier or decoder
The [Digital Jacks] screen establishes whether digital
connections have been made to an AV amplifier,
receiver, or external decoder. As there are numerous
options available, please refer to the instructions
supplied with the component the player is connected to
to determine what digital audio formats can be decoded.
If you have made no digital connections, select “Not
Connected”.
Settings:
Dolby Digital*
Dolby Digital/DTS
Dolby Digital/MPEG
Dolby D/DTS/MPEG
PCM
Not Connected
* Factory setting
Setting compatibility with 96 kHz
output
The [96 kHz PCM Audio] screen establishes whether or
not the AV component the player is connected to is
capable of processing an audio signal with a sampling
rate of 96 kHz. This screen only appears if connections
have been made to an external AV component as
determined in previous screens.
Settings:
No*
Select if the connected AV component cannot
process an audio signal with a sampling rate of
96 kHz.
Yes
Select if the connected AV component can
process an audio signal with a sampling rate of
96 kHz.
Don’t Know
Select if you are uncertain whether the
connected AV component can process an
audio signal with a sampling rate of 96 kHz.
* Factory setting
Setup Navigator
Audio1
General
Language
Video
2
Move
Exit
SETUP
Select
ENTER
Compatible with Dolby Digital
Digital Jacks
Not Connected
Dolby D/DTS/MPEG
Dolby Digital/MPEG
Dolby Digital/DTS
PCM
Dolby Digital
Amp Connection
Setup Navigator
Audio1
General
Language
Video
2
Move
Exit
SETUP
Select
ENTER
Digital jack not compatible with 96 kHz
96 kHz PCM Audio
Don't Know
Yes
No
Amp Connection
