43
“Memory Stick” Player
D
isplay and indicators
FORM 1
FORM 2
q
Source name
w
Bit rate indicator
e
Track number
r
Track title
t
Play time
y
Track artist name
B
asic operation
The “Memory Stick” player plays one
“MagicGate Memory Stick (MG Memory Stick)”
at a time. (See page 77.)
1. Press OPEN to open the front panel.
2. Insert a “Memory Stick” into the MS load-
ing slot until it clicks into position.
3. Close the front panel.
4. Press VOLUME to extend the VOLUME
outward.
• When you press VOLUME, it extends out-
ward so that it becomes easier to turn. To
retract VOLUME, press it again.
5. Turn VOLUME to adjust the volume.
6. Press
2
2
or
3
3
to select a track.
Pressing
3
skips to the start of the next
track.
Pressing
2
once skips to the start of the cur-
rent track. Pressing again will skip to the
previous track.
• If you press and hold
2
or
3
, you can per-
form fast forward or reverse.
7. Press OPEN and then press MS EJECT to
eject the “Memory Stick”.
• The access lamp lights while data are
being written. Never remove the “Memory
Stick” while the access lamp is lit, as other-
wise data may be destroyed.
• Be sure to close the front panel after
removing the “Memory Stick”.
WARNING:
• Do not use with the front panel left open. If the
front panel is left open, it may result in injury
in the event of an accident.
Note:
• You can select “Memory Stick” as the source by
pressing SOURCE when a “Memory Stick” is loaded
in this product.
• When the front panel is open, multi-function but-
tons are not available.
• Do not insert anything other than a “Memory Stick”
into the MS loading slot.
• A “Memory Stick” left partially inserted after ejec-
tion may incur damage or fall out.
• If the “Memory Stick” player cannot operate proper-
ly, an error message (such as “ERROR-30”)
appears on the display. Refer to “Understanding
“Memory Stick” player error messages” on page 81.
• During playback of music data with a limited num-
ber of playbacks, fast forward and reverse are not
possible, so that the number of playbacks can be
managed correctly.
• When TA interruption occurs during playback of
music data with a limited number of playbacks, the
number of playbacks is decreased by one. This can
be prevented by setting TA interruption to OFF in
advance.
Access lamp
MS EJECT button
MS loading slot
r y
q
e
t
r
t
q
w
e