3
Use cellular phone to register in this
unit.
To complete the registration, please check the
device name (
PIONEER BT UNIT
) and enter
the link code (1111) on your cellular phone. If
the registration is completed,
REG COMPLETED
is displayed.
#
Operation varies depending on the type of
your cellular phone. Refer to the instruction man-
ual that came with your cellular phone for de-
tailed instructions.
Note
If one cellular phone is shared of its registration
with another User registration assignment, Auto-
matic Connection may not work properly.
Connecting to a cellular phone
To use a phone wirelessly with this unit, it is
necessary first to establish a connection using
Bluetooth wireless technology.
!
HFP (Hands Free Profile) is prioritized over
HSP (Head Set Profile) in the connection
via Bluetooth wireless technology. If con-
nection cannot be established by HFP, HSP
connection takes place.
Connecting to a registered
phone manually
Select a phone from the registration assign-
ments to connect to the phone manually.
1
Press FUNCTION and hold until phone
user setting (e.g., PHONE 1, P1) appears in
the display, then press FUNCTION to select
one of the phone user settings.
After phone user setting is displayed, press
FUNCTION
until the desired phone user set-
ting (e.g.,
P1
) appears in the display.
2
Push MULTI-CONTROL left or right to
select CONNECT PHONE.
Each time
MULTI-CONTROL
is pushed left or
right, the status is selected in the following
order:
Device name
—
DELETE PHONE
(delete phone)
—
CONNECT OPEN
(connection open)
—
CONNECT PHONE
(connect)
#
If your cellular phone featuring Bluetooth
wireless technology has not been registered yet,
CONNECT PHONE
will not appear.
3
Push MULTI-CONTROL up to connect a
cellular phone to this unit.
While connecting,
CONNECTING
is flashing.
If the connection is established,
CONNECTED
is displayed.
#
If
AUTO CONNECT
is set to on, registered cel-
lular phone is connected automatically. For more
details, refer to
Connecting to a registered phone
automatically
on this page.
#
If the connection failed,
CONNECT ERROR
is
displayed. Check the cellular phone, then try
again.
Connecting to a registered
phone automatically
When Automatic Connection is active the unit
will automatically establish a connection with
a registered phone when it comes into range.
!
This feature may not work with all phones.
If your registered phone fails to connect
with Automatic Connection, use the man-
ual connection method explained in
Con-
necting to a registered phone manually
on
this page.
!
This feature cannot be set for each different
user phone.
Bluetooth Telephone
En
37
English
Section
08
