Pioneer DEH-P55BT, Руководство по эксплуатации

Страница: 18 / 162

%
Press DISPLAY.
Press
DISPLAY
repeatedly to switch between
the following settings:
Program service name
—
PTY information
—
Frequency
PTY (program type ID code) information is
listed on page 20.
#
PTY information and the frequency of the cur-
rent station appears on the display for eight sec-
onds.
#
If a PTY code of zero is received from a station
or the signal is too weak for this unit to pick up
the PTY code, you cannot switch to PTY informa-
tion display.
Selecting alternative
frequencies
If you are listening to a broadcast and the re-
ception becomes weak or there are other pro-
blems, the unit will automatically search for a
different station in the same network which is
broadcasting a stronger signal.
!
The default setting for AF is on.
%
Press TA and hold to turn AF on.
Press TA until AF indicator appears in the dis-
play.
#
To turn AF off, press TA and hold until AF indi-
cator disappears.
Notes
!
You can also turn the AF function on or off in
the menu that appears with the pressing of
FUNCTION .
!
Only RDS stations are tuned in during seek
tuning or BSM when AF is on.
!
When you recall a preset station, the tuner
may update the preset station with a new fre-
quency from the station
’
s AF list. No preset
number appears on the display if the RDS
data for the station received differs from that
of the originally stored station.
!
Sound may be temporarily interrupted by an-
other program during an AF frequency
search.
!
When the tuner is tuned to a non-RDS station
the
AF indicator flashes.
!
AF can be turned on or off independently for
each FM band.
Using PI Seek
If the unit fails to find a suitable alternative fre-
quency, or if you are listening to a broadcast
and the reception becomes weak, the unit will
automatically search for a different station
with the same programming. During the
search,
PI SEEK
is displayed and the output is
muted. The muting is discontinued after com-
pletion of the PI Seek, whether or not a differ-
ent station is found.
Using Auto PI Seek for preset
stations
When preset stations cannot be recalled, as
when travelling long distances, the unit can
be set to perform PI Seek during preset recall.
!
The default setting for Auto PI Seek is off.
See
Switching Auto PI Seek on page 64.
Limiting stations to regional
programming
When AF is used to automatically retune fre-
quencies, the regional function limits the se-
lection to stations broadcasting regional
programs.
1 Press FUNCTION to select REG.
Press FUNCTION until REG appears in the dis-
play.
RDS
En
18
Section
05