57
En
09
Control function
Sound is fast or slow.
When an HDMI cable is
connected, are audio signals
being output from devices
connected with cables other
than HDMI cables?
When a Pioneer AV receiver or amplifier compatible with the PQLS
function is connected directly to the player’s
HDMI OUT
terminal using
an HDMI cable, the PQLS function is activated when playing an audio
CD (CD-DA). Because of this, the sound output from components other
than the ones connected by an HDMI cable may be fast or slow. If this
happens, set
Control
to Off (page 43).
After a disc is inserted,
Loading
stays displayed and
playback does not start.
Are there too many files
recorded on the disc?
When a disc on which files are recorded is inserted, depending on the
number of files recorded on the disc, loading may take several dozen
minutes.
is displayed in file names,
etc.
The characters that cannot be displayed on this player are displayed in
.
A message indicating low
memory appears while
playing a BD-ROM disc.
• Connect a USB device (page 21).
• Erase the data stored on the connected USB device from
BUDA
Setup
(page 45).
Problem
Check
Remedy
Control function does not
work.
Is the HDMI cable properly
connected?
To use the Control function, connect the TV and AV system (AV receiver
or amplifier, etc.) to the
HDMI OUT
terminal (page 16).
Is the HDMI cable you are
using a High Speed HDMI
®
/
TM
Cable?
Use a High Speed HDMI
®
/
TM
Cable. The Control function may not work
properly if an HDMI cable other than a High Speed HDMI
®
/
TM
Cable is
used.
Is this player connected to
the TV using an HDMI cable
to watch the picture?
If video signals are being output from a terminal other than the
HDMI
OUT
terminal, the Control function does not work. Connect to the TV
using an HDMI cable (page 16).
Is the
HDMI Mode
set
appropriately?
• When connecting a device supporting the control function to the
HDMI OUT (MAIN)
terminal, set the
HDMI Mode
to
Dual
or
Single
.
• When connecting a device supporting the control function to the
HDMI OUT (SUB)
terminal, set the
HDMI Mode
to
Separate
or
Pure
Audio
(page 43).
Is
Control
set to
On
on the
player?
Set
Control
to
On
on the player (page 43).
Does the connected device
support the Control function?
• The Control function will not work with devices of other brands that
do not support the Control function, even when connected using an
HDMI cable.
• The Control function will not work if devices that do not support the
Control function are connected between the Control-compatible device
and the player. See page 17.
• Even when connected to a Pioneer product compatible with the
Control function, some of the functions may not work.
Also refer to the operating instructions for the connected device.
Is Control set to On on the
connected device?
Set Control to On on the connected device. The Control function
operates when Control is set to On for all devices connected to the
HDMI OUT
terminal.
Once connections and settings of all the devices are finished, be sure
to check that the player’s picture is output to the TV. (Also, check after
changing the connected devices and connecting and/or disconnecting
HDMI cables.) If the player’s picture is not being output to the TV, the
Control function may not work properly.
For details, refer to the operating instructions of the connected device.
Are multiple players
connected?
The Control function may not work if 4 or more players, including this
player, are connected by an HDMI cable.
Depending on the connected device, the function may not work.
Problem
Check
Remedy
BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 57 ページ ２０１４年９月９日 火曜日 午前１０時１４分
