19
En
02
Connecting an AV receiver or
amplifier
Connect to an AV receiver or amplifier in order to enjoy
the surround sound of Dolby TrueHD, Dolby Digital Plus,
Dolby Digital, DTS-HD Master Audio, DTS-HD High
Resolution Audio, DTS Digital Surround, LPCM, AAC or
DSD. For instructions on connecting the TV and speakers
to the AV receiver or amplifier, refer to the operating
instructions for AV receiver or amplifier.
Caution
• Hold the plug when connecting and disconnecting
the cable.
• Placing a load on the plug could result in faulty
contact and no video signals being output.
Achieving better video and sound quality
When connecting one TV (or projector) and AV amplifier
to the player, connect in such a way that the video and
audio signals are transferred separately in order to
achieve higher quality video and sound.
Caution
• Make sure to set
HDMI Mode
to
Separate
(page 43).
• If the AV amplifier connected to the
HDMI OUT (SUB)
terminal is also connected to a TV, the TV’s input may
switch automatically. If this happens, turn off the
control function with HDMI on the TV.
RS-232C
DIGITAL AUDIO OUT
LAN
(10/100)
USB
HDMI OUT
OPTICAL
MAIN
SUB
COAXIAL
ZERO SIGNAL
BDP-LX88’s rear panel
HDMI cable
(commercially
available)
AV receiver
or amplifier
To HDMI input
terminal
TV
Match the
direction of the
plug to the
terminal and
insert straight.
Direction of signal flow
To HDMI
input
te
rm
inal
AV receiver
or amplifier
HDMI cable
(commercially
available)
RS-232C
DIGITAL AUDIO OUT
LAN
(10/100)
USB
HDMI OUT
OPTICAL
MAIN
SUB
COAXIAL
ZERO SIGNAL
AV receiver
or amplifier
TV
Match the
direction of the
plug to the
terminal and
insert straight.
Direction of signal flow
To HDMI
input
te
rm
in
al
HDMI cable
(commercially
available)
BDP-LX88’s rear panel
BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 19 ページ 2014年9月9日 火曜日 午前10時14分