The operation procedure for
inputting characters manually
Numeric characters such as IP address can be
entered on the input screen using the number buttons
(0 to 9) or
and
ENTER
on the remote control.
IP Address
Netmask
Gateway
123
Press
1
ENTER
at the boxes in which characters
are to be entered, and the input screen will
appear.
Numeric
1
2 3 4 5 6 7 8 9 0
Edit
Press
2
to select the desired input mode.
Press the number buttons (0 to 9) or
3
to
select a number/character, then press
ENTER
.
Input character list
Numeric
1 2 3 4 5 6 7 8 9 0
Edit
Cancel
Left
Right
Complete
Del.Char.
The same operation as
*
RED
,
GREEN
,
BLUE
,
YELLOW
and
RETURN
can be performed by
selecting each of the items and pressing
ENTER
.
“Del.Char.” stands for deleting characters.
Repeat the step 3 to display all of the desired
4
characters/numbers in the input field.
Example:
The screen for inputting numeric characters
Numeric
123
1 2
3
4 5 6 7 8 9 0
Edit
NOTE
Press
•
RETURN
(Del.Char.) to delete a number/
character you have input.
To change a number/character you have input, press
•
GREEN (Left)
or
BLUE
(Right)
to select the number/
character you want to change, and press
RETURN
(Del.Char.). Then, press
to select a new number/
character you want to input, and press
ENTER
.
Press
5
YELLOW
(Complete)
to fix the numbers
which have been input.
IP Address
Netmask
Gateway
123
6
Repeat step 1 to 5 to finish inputting all the
required characters.
Press
9
ENTER
to test the connection.
For setting the IP address, press
10
to select
“Yes” or “No”, then press
ENTER
.
Do you obtain the IP address
automatically?
IP Address
Netmask
Gateway
Next
Yes
No
If selecting “Yes”: The IP address is automatically
•
obtained.
If selecting “No”: The IP address, netmask, gateway
•
and primary and secondary DNS IP addresses are
manually entered using the screen for inputting
characters. (See right.)
Press
11
to select “Next”, then press
ENTER
.
For testing the connection to the internet, after
12
confirming the settings, press
to select
“Test”, then press
ENTER
.
“Test” is available only when setting to obtain the IP
•
address automatically. “Test” cannot be selected if the
IP address has not been obtained automatically.
Confirm the current setting.
: xxx xxx xxx xxx
: xxx xxx xxx xxx
: xxx xxx xxx xxx
: xxx xxx xxx xxx
: xx:xx:xx:xx:xx:xx
IP Address
Netmask
Gateway
DNS Address
MAC Address
Test
Complete
As a result of the test, if the internet connection fails,
•
enter the setup values manually.
Press
13
to select “Complete”, then press
ENTER
.
Settings
23
Settings
Selected by
pressing
Selected by
pressing
