Messages for Audio Functions
When problems occur in the audio source, a message may appears on the display. Refer to the
table below to identify the problem, then take the suggested corrective action. If the error persists,
contact your dealer or your nearest Pioneer Service Center.
Built-in DVD drive
Message
When
What to do (See)
Unreadable disc
If you try to use a disc which is in-
compatible with this system.
Insert a suitable disc.
If you insert a disc upside down.
Insert the disc with the label upward.
If the disc is dirty.
Clean the disc.
If the disc is cracked or otherwise
damaged.
Insert a normal, round disc.
Mechanical failure of DVD drive oc-
curs.
Consult your Pioneer dealer.
Playback error. Please remove
the disc.
Electrical or mechanical error has
occurred.
Press
RESET
button. (Also see the Hardware
Manual.) (Page 187)
Region code error
The disc does not have the same re-
gion number as the navigation sys-
tem.
Replace the DVD-Video with one bearing the
correct region number.
Playback error due to irregu-
lar temperature. Please re-
move the disc.
The temperature of the built-in DVD
drive exceeds the operating limits.
Park your vehicle in safe place, turn the igni-
tion switch off, and wait until the built-in DVD
drive
’
s temperature returns to within normal
operating limits.
ATTENTION! Viewing of front
seat video source while driv-
ing is strictly prohibited.
Parking brake interlock is activated.
Park your vehicle in the safe place and apply
the parking brake. (Page 22)
Search error
The title number, chapter number,
time, or 10 key command that you
enter in [
10Key Search
] do not
exist. (This message will appear
when the DVD drive cannot accept
that command.)
Enter the available numbers or 10 key com-
mand or use another search method.
Hard disk drive (Music Library)
Message
When
What to do (See)
This CD cannot be recorded
If you insert a CD which prohibits
second-generation copies or dupli-
cate.
Use another CD and retry.
•
Recording error. Switching
to CD playback mode
•
Recording error. Recording
is stopped
•
The recording was unstable.
Restart the recording from
the beginning of the track.
If recording can not be carried out
due to continuous skipping on cer-
tain part of the disc because the
disc is dirty, scratched, or otherwise
damaged, the pick-up lens of the
DVD drive is dirty, or extreme vibra-
tion occurs continuously.
!
Clean the disc and retry.
!
Clean the pick-up lens with a commercially
available cleaning kit for DVD, then retry.
!
Retry in vibration-free condition.
Appendix
En
184
Appendix
Содержание AVIC Z3 - Navigation System With DVD player
Страница 186: ...Appendix En 186 Appendix ...