Appendix
67
Engb
Bluetooth
Message
Cause
Action
Error-10
The power failed for the
Bluetooth module of this
product.
Turn the ignition switch to OFF and
then to ON.
If the error message is still dis-
played after performing the above
action, please contact your dealer
or an authorised Pioneer Service
Station.
MirrorLink
Message
Cause
Action
The application list
could not be read out.
Failed to load the applica-
tion list.
Disconnect the cable from the
smartphone, and then connect
the smartphone again after a few
seconds.
Turn the ignition switch to OFF and
then to ON.
If the error message is still dis-
played after performing the above
action, reset the smartphone.
If the error message is still dis-
played after performing the above
action, please contact your dealer
or an authorised Pioneer Service
Station.
There is no supportted
application on your
MirrorLink device.
No supported applications
can be found.
Install
MirrorLink
compliant appli-
cations to your
MirrorLink
device.
Communication error
occurred.
There was a communica-
tion error.
Disconnect the cable from the
smartphone, and then connect
the smartphone again after a few
seconds.
Turn the ignition switch to OFF and
then to ON.
If the error message is still dis-
played after performing the above
action, reset the smartphone.
If the error message is still dis-
played after performing the above
action, please contact your dealer
or an authorised Pioneer Service
Station.
Launching the applica-
tion failed.
Failed to launch the
application.
Try again.
Failed to display the
screen of your device
because of irregular
resolution.
The image size is too large. The size of the images transferred
from the device exceeds 800 × 480.
Handling and care of discs
Some basic precautions are necessary when
handling your discs.
■
Built-in drive and care
Use only conventional, fully circular
discs. Do not use shaped discs.
Do not use cracked, chipped, warped, or
otherwise damaged discs as they may
damage the built-in drive.
Use 12-cm discs. Do not use 8-cm discs
or an adapter for 8-cm discs.
When using discs that can be printed
on label surfaces, check the instruc-
tions and the warnings of the discs.
Depending on the discs, inserting and
ejecting may not be possible. Using
such discs may result in damage to this
equipment.
Do not touch the recorded surface of the
discs.
Store discs in their cases when not in
use.
Avoid leaving discs in excessively hot
environments including under direct
sunlight.
Do not attach labels, write on or apply
chemicals to the surface of the discs.
Do not attach commercially available
labels or other materials to the discs.
—
The discs may warp making the disc
unplayable.
—
The labels may come off during
playback and prevent ejection of the
discs, which may result in damage to
the equipment.
To clean a disc, wipe it with a soft cloth,
moving outward from the centre.
Condensation may temporarily impair
the built-in drive’s performance. Leave
it to adjust to the warmer temperature
for about one hour. Also, wipe any damp
discs with a soft cloth.
Playback of discs may not be possible
because of disc characteristics, disc
format, recorded application, playback
environment, storage conditions and so
on.
Road shocks may interrupt disc
playback.
Read the precautions for discs before
using them.
■
Ambient conditions for playing
a disc
At extremely high temperatures, a tem-
perature cutout protects this product by
switching it off automatically.
Despite our careful design of the prod-
uct, small scratches that do not affect
actual operation may appear on the disc
surface as a result of mechanical wear,
ambient conditions for use or handling
of the disc. This is not a sign of the
malfunction of this product. Consider it
to be normal wear and tear.
Playable discs
■
DVD-Video and CD
DVD and CD discs that display the logos
shown below generally can be played on this
built-in DVD drive.
DVD-Video
