79
En
04
Chapter 4
Adjusting audio and video
Important
• Press
BD (HDMI 1)
to set the remote control to
BD
control mode
in order to operate the Blu-ray disc player.
• The
BD
settings are listed on two separate pages. To cycle
between pages, use the
PAGE
button.
Adjusting the video
The quality of the playback picture can be adjusted according to the
TV you are using.
1
During playback, press VIDEO ADJ
(LCD page 2)
to display
the Video Adjust screen.
The Video Adjust screen can also be displayed by selecting
Video
Adjust
from the
TOOLS
menu.
2
Select a preset.
Select using
/
according to the TV being used.
•
LCD
– Select this when connected to a liquid crystal display TV.
•
PDP
– Select this when connected to a plasma TV of another
brand.
•
Pioneer PDP
– Select this when connected to a Pioneer plasma
TV.
•
Projector
– Select this when connected to a front projector.
•
Professional
– With this setting, video signal processing is
restrained. Select this when connected to a professional
monitor.
•
Memory1 to 3
– Picture quality settings with adjusted
parameters can be stored in the memory. For a description of
the parameters, see
When Memory1, 2 or 3 is selected
below.
When Memory1, 2 or 3 is selected
1
Select Adjustments.
Use
to select
Adjustments
, then press
ENTER
.
A detailed settings screen appears.
2
Select the item to be adjusted.
Use
/
to select.
3
Adjust the picture quality.
When
/
are pressed, the adjustments can be made watching
the picture. The detailed settings screen reappears when
ENTER
is
pressed.
•
Prog.Motion
– Adjust according to the type of image (movie or
still image). This is effective when outputting video materials as
progressive images.
•
Pure Cinema
– This setting optimizes the operation of the
progressive scanning circuit for playing film materials. Normally
set it to
Auto1
. If the picture seems unnatural, switch this to
Auto 2
,
On
or
Off
(page 80).
•
YNR
– Reduces noise in the luminance (Y) signal.
•
CNR
– Reduces noise in the chroma (C) signal.
•
BNR
– Reduces the block noise (block-shaped distortion
generated upon MPEG compression).
•
MNR
– Reduces the mosquito noise (distortion along the
contours of the picture generated upon MPEG compression).
•
Detail
– Emphasizes the picture’s contours.
•
White Level
– Adjusts the level of the white portions.
•
Black Level
– Adjusts the level of the black portions.
•
Black Setup
– Select the black level as the setup level. Normally
select
0 IRE
. If the black is too dense and all the dark colors are
displayed in a uniform black due to the combination with the
connected monitor, select
7.5 IRE
.
•
Gamma Correction
– Adjusts how the dark portions of the
picture look.
•
Hue
– Adjusts the balance between green and red.
•
Chroma Level
– Adjusts the density of the colors.
BD 1/2
BD
DVR
DVD
TV
FM / AM
INPUT
SELECT
HDMI 1
HDMI 2
HDMI 3
BD
HDMI 1
BD 1/2
BD 2/2
ENTER
CLEAR
1
2
3
4
5
6
7
8
0
9
PLAY
MODE
RESO-
VIDEO
ADJ
BD 2/2
VIDEO
ADJ
SETUP
TOP MENU
DISC
NAVIGATOR
HOME
MENU
TOOLS
MENU
RETURN
Adjustments
Video Adjust
PDP
Prog. Motion
Pure Cinema
YNR
CNR
BNR
MNR
Video Adjust [ Memory1 ]
Use [ ][ ] to adjust the picture to progressive scan.
Motion
Still
Auto1
Off
Max
Off
Max
Off
Max
Off
Max
1/2 Page
Motion
Still
Prog. Motion
LX01BD_2.book Page 79 Friday, September 5, 2008 11:29 AM
Содержание AS-LX71
Страница 56: ... Section Two Blu ray Disc Player SBDP LX08 ...