background image

English

Important Information

4

En

iii

En

DECLARATION OF CONFORMITY

This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions. (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.

U.S. Responsible Party:
Address:

Tel. No.:

PIONEER ELECTRONICS (USA) INC.
P.O. BOX 1760, LONG BEACH, CA., 
90801-1760 U.S.A.
800 (421-1625)

Type of Product:

Equipment Classification:

Models:

Plasma Display

Class B Peripheral

PRO-1410HD

We hereby declare that the equipment specified above

conforms to the technical standards as specified in the FCC Rules. 

IMPORTANT NOTICE

The serial number for this equipment is located on the

rear panel. Please write this serial number on your en-

closed waranty card and keep in a secure place. This is

for your security.

This Class B digital apparatus complies with Canadian

ICES-003.

Caution

This model is for use with the following optional accessories.
Use with other optional accessories is capable of resulting in
instability causing possible injury.

Table top stand: PDK-1014
Wall mount unit: PDK-WM03

English

Important Information

5

En

iv

En

IMPORTANT SAFETY INSTRUCTIONS

Read before operating equipment

1.

Read these instructions.

2.

Keep these instructions.

3.

Heed all warnings.

4.

Follow all instructions.

5.

Do not use this apparatus near water

.

6.

Clean only with a dry cloth.

7.

Do not block any of the ventilation openings. Install in
accordance with the manufacturers instructions.

8.

Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.

9.

Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other

. A grounding type plug

has two blades and third grounding prong.The wide
blade or third prong are provided for your safety

. When

the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.

11. Only use attachments/accessories specified by the

manufacturer

.

12.

Use only with a cart, stand, tripod, bracket,
or table specified by the manufacturer

, or sold

with the apparatus.When a cart is used, use
caution when moving the cart/apparatus

combination to avoid injury from tip-over

.

13. Unplug this apparatus during lightning storms or when

unused for long periods of time.

14. Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been
damaged in any way

, such as power

-supply cord or plug

is damaged, liquid has been spilled or objects have fallen
into apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally

, or has been

dropped.

15.

Damage Requiring Service

 - The appliance should be

serviced by qualified service personnel when:

A

. The power supply cord or the plug has been damaged;

or

B

. Objects have fallen, or liquid has been spilled into

the appliance; or

C

. The appliance has been exposed to rain; or

D

. The appliance does not appear to operate normally

or exhibits a marked change in performance; or

E

. The appliance has been dropped, or the enclosure

damaged.

16.

Tilt/Stability

  -  All  televisions  must  comply  with

recommended international global safety standards for
tilt and stability properties of its cabinets design.

Do not compromise these design standards by
applying excessive pull force to the front, or top, of
the cabinet which could ultimately overturn the
product.

Also, do not endanger yourself, or children, by placing
electronic equipment/toys on the top of the cabinet.
Such items could unsuspectingly fall from the top of
the set and cause product damage and/or personal
injury .

17.

Wall Mounting

 - The appliance should be mounted to a

wall only as recommended by the manufacturer

.

18.

Power Lines

 - An outdoor antenna should be located

away from power lines.

19.

Outdoor Antenna Grounding

 - If an outside antenna is

connected to the receiver

, be sure the antenna system is

grounded so as to provide some protection against
voltage surges and built up static charges.
Section 810 of the National Electric Code, ANSI/NFP

A

No. 70- 1984, provides information with respect to proper
grounding of the mats and supporting structure
grounding of the lead-in wire to an antenna-discharge
unit, size of grounding connectors, location of antenna-
discharge unit, connection to grounding electrodes and
requirements for the grounding electrode.

20.

Objects and Liquid Entry

 - Care should be taken so that

objects do not fall and liquids are not spilled into the
enclosure through openings.

Apparatus shall not be exposed to dripping or splashing
and that no objects filled with liquids, such as vases, shall
be placed on apparatus.

WARNING

To reduce the risk of fire or electric shock, do not expose
this apparatus to rain or moisture.

Содержание 1410HD




















Отзывы: