WORK
7
8
is
rned it as far as it will go, the suction
on “0”
once the work is finished.
9. Check the brake (6) is off.
. Release the lever (3) and lower the base. In the case of an automatic machine,
lower the key (7).
. Lower the squeegee, rotating the lever (4) anticlockwise. If the machine
automatic, use the key (5); when you have tu
motor will switch on. To switch off the suction motor, turn the key to positi
3
4
6
5
7
10.
tivate the brushes; the machine will begin to
move.
here is sufficient solution and that the
squeegee dries perfectly
1
lution runs out.
Press the "man present" levers (7) to ac
During the first metres, check t
.
1. The machine will now start to work efficiently until the detergent so
2
, just push the command levers (1) downwards.
. REVERSE
OPERATION
To activate the reverse direction
With the base lowered, the brushes go on turning but the solution supply is
interrupted. In the case of an automatic machine, the squeegee rises by itself.
base to avoid
ruining the brushes.
ATTENTION:
When making even brief reverse movements, check
the squeegee is raised. For long stops, raise the
3
The
causing the suction tube to close. In this ca
ta
e.
. OVERFLOW DEVICE
machine is fitted with a float which intervenes when the recovery tank is full,
se, it is necessary to empty the recovery
nk, removing the cap of the rear drainage hos
to
protect against contact with dangerous solutions.
7
1
ATTENTION:
This operation must be carried out using gloves
19
