MACHINE PREPARATION
18. RECOVERY
TANK
Check the cap of the drainage tube (on the rear of the machine) is correctly closed.
ATTENTION:
To avoid foam production, put a minimum quantity
of antifoam liquid in the recovery tank before starting to clean.
19. SOLUTION TANK / DETERGENT SOLUTION (VERSIONS WITHOUT CDS)
Re
inlet cap and check the solution filter (1) is correctly assembled.
solution tank is correctly closed.
Fill it with clean w ter at a temperature not exceeding 50°C. You can check the
uantity in the tank by means of the rear tube (3). The solution tank has a maximum
capacity of about 55 litres. Add the liquid detergent to the tank in the concentration
and manner indicated on the detergent manufacturer's label. The formation of
excess foam could damage the suction motor, so use only the minimum amount of
detergent necessary.
move the front
Check the filter cover (2) beneath the
a
q
ATTENTION:
Always use detergents whose manufacturer's
label indicates their suitability for scrubbing machines. Do not
use acid or alkaline products or solvents without this indication.
In addition, you are advised to always use low foam detergents.
Do not use pure acids.
acid/alkaline detergents or solutions, to avoid the risk of burning
your hands.
ATTENTION:
Put on protective gloves before handling
2
3
1
13
