Pinnacle microguard, Руководство по установке

Страница: 47 / 48

WARRANTY
Manufacturer warrants that this product will be free from
defects in material and workmanship for a period of one
year from the date of shipment thereof. Within the warranty
period, manufacturer will repair or replace such products
which are returned to it with shipping charges prepaid and
which will be disclosed as defective upon examination
by the manufacturer. This warranty will not apply to any
product which will have been subject to misuse, negligence,
accident, restriction, and use not in accordance with
manufacturer’s instructions or which will have been altered
or repaired by persons other than the authorized agent or
employees of the manufacturer.
DISCLAIMER
The provisions of the paragraph “Warranty” are the sole
obligations of the manufacturer and exclude all other
warranties of merchantability, expressed or implied.
Further, there are no warranties which extend beyond the
above warranty.
LIMITATION OF LIABILITY
In the event of any claim or breach of any obligations
of manufacturer under any order, whether expressed or
implied, and particularly in the event of any claim or a breach
of the warranty or warranties contained in the paragraph
“Warranty” or of any other warranties, expressed or implied
which might, despite the paragraph entitled “Disclaimer,” be
determined to be incorporated in any order, the company
shall under no circumstances be liable for any consequential
or special damages, either in law or in equity, or for losses
or expenses or claims for the same arising from the use of,
or inability to use, the products of the manufacturer for any
purpose whatsoever.
The entire machine safety
system must be tested at the start of every shift.
Machine testing should include: (1) proper machine
operation and stopping capability; and (2) verification
of proper installation and settings of all point of
operation guards and devices before the operation
is released for production.
DISCLAIMER
Pinnacle Systems, Inc. does not assume liability for the
contents of this publication or the use of any products
described. Pinnacle Systems, Inc. reserves the right to
make changes to the products or any catalogs without
further notice.
CHANGE IN SPECIFICATIONS
Product specifications and accessories may be changed
at any time based on improvements and other reasons.
It is our practice to change part numbers when published
ratings or features are changed, or when significant con-
struction changes are made. However, some specifica-
tions of the Product may be changed without any notice.
When in doubt, special part numbers may be reassigned
to fix or establish key specifications for your application.
Please consult the factory.
ERRORS AND OMISSIONS
Information presented by Pinnacle Systems, Inc. has
been checked and is believed to be accurate; however,
no responsibility is assumed for clerical, typographical or
proofreading errors or omissions.